PDA

View Full Version : Carpet Trim



squeeg333
02-24-2010, 03:11 PM
Not to innundate the sevice and repair board with posts, but that's what I'm gonna do! :)

A small portion of the plastic carpet trim that runs around the boat is delaminating from the fiberglass. I can't tell if the trim is seperating from the adhesive back, or if the adhesive is coming off of the fiberglass. It's a small section, maybe an inch or two, and it's in the rounded corner of the bow. I thought about getting some two part epoxy in there and setting it for good, but thought I'd get other ideas if you guys had any.

kaneboats
02-24-2010, 03:13 PM
I use two part epoxy for stuff like that all the time. It's cheap and works great.