PDA

View Full Version : Kicker ZX450.2



mmandley
02-24-2010, 10:59 PM
Im selling my Kicker ZX 450.2 amp. I bought this amp last June brand new not a refurb. It ran my KMT6s on my tower last year.

There is no damage to this amp, it was never put into protection mode and was wired as intended. It is stable at 2ohm.

$150. buyer pays shipping unless you are close to Portland and we can meet in person.

PM me if your interested.

Specs.

KICKER ZX AMP450.2 2 CHANNEL 450.2 2 CHANNEL

# Max power output 450 watts x 2
# RMS power handling 4 ohms 150 watts x 2 2 ohms: 225 watts x 2 bridged 4 ohms 450 watts x 1
# Frequency response: 20Hz-20000Hz
# Tuned bass EQ (0-18dB bass boost at 40Hz)
# Variable high-pass filter (50Hz-200Hz 12dB octave)
# Variable low-pass filter (50Hz-200Hz 12dB octave)
# CEA-2006 compliant amplifier
# MOSFET power supply
# Wired remote bass level control (included)
# Speaker-level inputs compatible (switchable) through RCA connection
# Thermal voltage and short circuit protection circuitry
# 9 5 8 W x 2 1 8 H x 16 3 4 L
# Includes 2-year warranty

viking
02-26-2010, 03:32 PM
OK OK! I"m putting it together now.
1.) You upgraded your sound system already once last fall
2.) you've listed your sub, amps, and deck
3.) your boat is over at Exile :)

Going all out now aren't you?

mmandley
02-26-2010, 05:27 PM
Yes sir just read my new signature it says it all brotha

newty
02-27-2010, 12:50 AM
See mike, you are puttin coals to my feet!:)

mmandley
02-27-2010, 09:03 AM
See mike, you are puttin coals to my feet!:)

Quite your huffin and get in da water. Those feet will cool right off bro

mmandley
03-02-2010, 10:32 AM
Bumpin this thread.


This is a great amp.
Retails at. 200 Refub up to 400 Brand new

Little extra verbage about the amp

One of the best things about Kicker 2 Channel amplifiers is their ability to run either sub woofer or full range speakers. The ZX450.2 is ideal for almost any application and can be custom suited to any install. The amp is rated at a TRUE 225 Watts RMS and 450 Watts Peak @ 4 Ohm Bridged! The ZX450.2 amp includes a 12 dB octave variable crossover, a 95 dB signal to noise ratio

The ZX450.2 amplifier is a Class A/B model amplifier which can be used as either a subwoofer or full range speaker amplifier. In general if running subs the amp works best at a 4 Ohm Bridged Load. In the Full Range mode the amplifier can be ran in a left and right stereo mode

If you dont like my price PM with a reasonable offer i realy would like to get this sold soon.