PDA

View Full Version : Staples...SS or Monel?



mcdye
03-18-2010, 09:45 AM
Needing to do some repairs, I live inland and donít see salt corrosive issues. It seems a big price difference between T50 Stainless Steel and Monel staples. Any thoughts?

kaneboats
03-18-2010, 10:29 AM
You have to assume they are going to get wet. I wouldn't use anything but SS. But, they are expensive.

mcdye
03-18-2010, 10:32 AM
reading on the box for Arrow SS(~$13) they state not for marine use...the marine websites seem to sell the Monel which are higher price (~$35)..

kaneboats
03-18-2010, 10:38 AM
One site has this description:

Monel staples contain roughly 66 percent nickel and 33 percent copper. This is a unique alloy that prevents them from creating the galvanic corrosion that stainless steel staples form when they come in contact with metal screen or steel fasteners.

Here's a discussion of this issue on an offshore forum:

http://www.offshoreonly.com/forums/general-boating-discussion/211028-stainless-vs-monel-staples-advice.html

Good luck!

newty
03-18-2010, 11:31 AM
Monel is the shiz. We used to use it in the chem industry because its anti-corrosive qualities.
I didn't know there was such a thing as monel staples. I wonder if you could buy them for a pneumatic staple gun?

Razzman
03-18-2010, 12:23 PM
I used SS staples when i re-did a bunch of stuff on the last boat, no problems. But then they didn't cost me squat either, actually $.01 per box! No lie! Went to home depot to get them, grabbed a box and went to self help checkout. Swiped other stuff through and when i got to the staples it said "$.01" so i told the wife "go grab three more boxes, quick!" Sure enough they all swiped at $.01! I still got SS staples out the ...! :p

So also remember that alot of stuff that says "not for marine use" is referring to salt water, not fresh. Believe it or not many companies don't consider fresh water "marine".

mcdye
03-18-2010, 12:32 PM
Thanks...SS will work for me and save some $...probably not lucky to get a snatch run like you, Rzm...lol

badasshybrid
03-18-2010, 06:06 PM
I bought some staples this week, I seen SS and Monel. Both said marine use but the monel said not to be used with pressure treated wood because they would corrode.

kaneboats
03-18-2010, 07:46 PM
I've had good results with SS in trailer bunks (pressure treated) and in the vinyl seat backing in Moombas. That's what I'd use.

deepcove
03-18-2010, 08:06 PM
I had the rear seat of my moomba re upholstered a couple years ago. I figured as it was for marine they would automatically use stainless staples....that was a bad assumption.. :(

I guess that is why the guy who did the work is no longer in business.

Sled491
03-18-2010, 10:57 PM
Man we have all the experts on this board :D

Way to go Z

Hey Z what happened to your signature?

Sled491
03-19-2010, 07:57 AM
Yep that's what I was refering too. Don't let the man get you down :)

Sled491
03-19-2010, 08:11 AM
Don't get me started on taxes. I could buy a new skii boat every year if it wasn't for taxes :(