PDA

View Full Version : Part Numbers,Specifications Torques Etc



DOCDRS
04-18-2010, 02:17 PM
This list can/will be updated as these are identified, I take no responsibility for the accuracy of this report please feel free to add part numbers as you know as well


Indmar engine owners manual ftp://ftp2.indmar.us/Manuals/Operato...s Manual.pdf

(ftp://ftp2.indmar.us/Manuals/Operator's Manuals/2006 Operator's Manual.pdf)Indmar repair manual http://www.bakesonline.com/images/MediaLibrary/Indmar_5.7RepairSpecs.pdf
(http://www.bakesonline.com/images/MediaLibrary/Indmar_5.7RepairSpecs.pdf)
Other manuals http://www.bakesonline.com/boatinfo.aspx
Oil Filters
----------------
AC/Delco PF25
Castrol CM30
Mobil M1- 302
Fram PH30 PH5 also
Napa 1069
Pennzoil PZ3
Penske PN30
Purolator L20049
Motorcraft FL10
Quaker State QS30
WIX 51069

Prop nut torque 30-35 ftlbs
Prop Nut size 1 1/16" for 1 1/8" shafts 1" ? for 1" shafts ?
spark plug 11 ftlbs
shaft coupler bolts 25-30 ftlbs
Exhaust Manifold Bolt Torque - 18 to 24 ft-lbs
Exhaust Riser Bolt Torque - 18 to 22 ft-lbs


impeller Johnson 812 b
inline fuel filter Napa 3299 Carquest 86299
1/4- 1/2" play on v and serpentine belts
bilge pump Atwood Sahara model S500.

starter parts solenoid for the 4 wire PG260 starter.

Transmission mount bushings rubber 536004. Inboard online $8.61
here are the spark plugs

http://www.summitracing.com/parts/ACF-41-101/ for 340 ext/cat engines
http://www.summitracing.com/parts/ACF-MR43LTS/ for mpfi, carbed engines

brain_rinse
04-08-2011, 04:25 PM
Another option for spark plugs on the 325 engines. Stock many came with AC 41-993 Platinums (gapped at .060), but these have been replaced by AC 41-101 Iridium (also gapped at .060)

squeeg333
09-01-2011, 02:31 PM
Exhaust Manifold Bolt Torque - 18 to 24 ft-lbs

Exhaust Riser Bolt Torque - 18 to 22 ft-lbs

Replicant
10-24-2011, 06:46 PM
Another option on oil filters is the K&N HP2002. A well made filter and a bit deeper (more volume?). Also, the hex nut top is very handy for removal.

jester
05-28-2012, 04:12 PM
Just something to note on the spark plugs's. The 08 Manual calles for an AC 41-932. This part has been replaced with the AC 41-993.

hans
04-30-2013, 10:49 PM
Another option for spark plugs on the 325 engines. Stock many came with AC 41-993 Platinums (gapped at .060), but these have been replaced by AC 41-101 Iridium (also gapped at .060)

My manual says that the gap should be 0.040 in. Do I have to change the gap of the ac 41-101 or just let it to 0.06?

kaneboats
04-30-2013, 11:13 PM
Thermostat IND985009 or S985009 (160 degree)
Gasket S551004

04OUTBACK
05-01-2013, 09:31 AM
Great List! THANKS