View Full Version : everyone help please
04-22-2010, 09:35 PM
i have a 2008 outback v the wake plate was broke meaning both acutators are broke! any ideas
04-22-2010, 09:49 PM
04-22-2010, 09:50 PM
ya the hydrolic actuators hydrolics that move the plate up and down there snaped at the neck and hydrolic fluid (automatic transmission fluid) is coming out
04-22-2010, 09:58 PM
anyone got ideas
04-22-2010, 10:32 PM
It's in your manual - Bennett trim tabs. They are hydraulic actuators so that's the fluid you are seeing.
FYI - I deleted your other 2 posts. Just post in one place as most everyone checks all the different forums.
04-22-2010, 10:35 PM
i need to order new acuators
04-22-2010, 10:37 PM
Since you broke the actuator to the point of leaking fluid, I'm not sure how you'd be able to take it on the water until you get it fixed. You will be able to order just the actuators and plate without all the internals.
04-22-2010, 10:39 PM
so i just need to oreder the actuator and the plate from bennett
04-22-2010, 10:51 PM
i was just looking at it it looks the green wire that went in from the boat to the to the acutator which controls the idicator is cut i wonder if that would come with the new acutator?
04-22-2010, 10:54 PM
Just call Bennett in the morning. They will be able to tell you all the parts you need and can probably overnight the parts as well if you're in a hurry.
04-22-2010, 11:10 PM
thanks ill call in the moring
04-22-2010, 11:11 PM
the brain has it . . . call Bennett in the morning @ 954.427.1400.
they have good website too that you can check out tonight that has a tech help area with videos that might help prepare you for what you're going to need to do to get back on the water.
04-23-2010, 02:48 PM
i just got off the phone with bennett they are sending me new acuators should have them soon then just need to install thanks guys.....
Powered by vBulletin® Version 4.2.0 Copyright © 2014 vBulletin Solutions, Inc. All rights reserved.