PDA

View Full Version : tower help!!



outbackv
06-02-2010, 01:05 PM
hey guys on my tower the one of the screws that hold the tower came off at the lake or maybe even on the road its the one that you would un screw to fold the tower down anyone know where i could order a new one or if maybe a hardware store could help me out lwt me know thanks
2008 outback v

kaneboats
06-02-2010, 02:00 PM
I might have an extra one that will work till you can order a new one. I'll take a look around.

kaneboats
06-02-2010, 02:01 PM
Oh wait, that's the OBV. I was going to match up on mine (LSV), but I think yours are different. Can you tell me the length and thread size? I think I have two different ones left over from an old aftermarket tower. I will still look around.

cab13367
06-02-2010, 03:24 PM
Did you try the dealer?

viking
06-02-2010, 05:41 PM
Fastenal has just about every size and kind of bolt/screw you can find. You might try them?

NCSUmoomba
06-02-2010, 06:23 PM
I ordered some from mcmaster-carr. shipping was very quick, prices were good, and there selection is amazing.

outbackv
06-02-2010, 07:21 PM
let me know if you have any laying around my tower kane i believe is identical to yoursill get the size when i get home......is mcmaster a website as well as fastenal?

outbackv
06-02-2010, 07:25 PM
mcmaster is a website i just checked they have some that will work wont be home for awhile if a one knows the size and length i need let me know so i can order them thanks guys

kaneboats
06-03-2010, 12:57 AM
I'm so sorry. I went through all 3 boxes of the old boat parts I have around. What I did when I sold the O/B is I gave the guy a whole box of stuff he might need. I'm sure now I let all those extra parts go. Age is affecting the memory I guess.

outbackv
06-03-2010, 01:05 AM
It's alright thanks for checking though greatly appreciated! This site is great, has helped me answer and solve so many things!! I tried calling the dealer and got the run around if any one has ever oredered these screws and know the length and width of them let me know I can order them at mcmaster.com just need the dimensions
thanks again guys!!

kaneboats
06-03-2010, 01:38 AM
Allright, who has the OBV and can give the specs on this one? Thanks!

outbackv
06-03-2010, 02:54 PM
alright guys i couldnt find anyone with that new the thread width and length so i went mcmaster.com and ordered 2 different sixes i hope they work cause it wouldnt only let me order one so i have lots of the same screws coming hopefully they work if they do and anyone needs any let me know cause ill have 2 boxes with i believe 50 each in them
i ordered 1 1/2" length by 1/4" in width and then 1 1/4" length and 5/16"

outbackv
06-08-2010, 10:13 PM
Screws just came in and are to small ugh....

jmvotto
06-08-2010, 10:39 PM
ditto what vikking said Fastenal has all the fasteners and SS screws nuts bolts etc.

http://www.fastenal.com/web/locations.ex;jsessionid=6a46db0cfd74aa4651c01786a3 1178ae990a68ad3df0dc5a4d6b1ea63154174d.e34RbhmQc3a Sai0Rc38Lch8Qb3z0rQjwqQzOnh8

any of these close.

If you know the exact size i will stop and pick you up a few and send them.

funn i have the OBV but its at the lake 60 miles away. i could check over the weekend. not sure how to exactly measure it either:confused:

outbackv
06-08-2010, 11:49 PM
Thanks jmvotto! I know they are 1" long know that I got what I oderered just was off on the thread size I just ordered 1" with the bigger thread size they should work I'll post the exact size once I get the right ones just in Case anyone ever needs any Thanks though
Bruno

outbackv
06-10-2010, 12:21 PM
just returned my old screws and got new ones 5/8 16 is what they are and i believe
1 1/4" is the length