PDA

View Full Version : v-drive ballast install?



ibboat75
07-20-2004, 03:24 AM
got a '03 lsv. just ordered the lauch pad v drive coverless sacks(350 each). what kind of fittings do i need to plumb them in the factory locker ballast? can i get the hose and fittings from a home supply(lowes)? like a Tee fitting or something to tap into the stock hoses. what about to connect the sacks. do they come with the ballast?
what about installing another pump to speed the fill time along.
thanks.
cb

brentburtrum
07-20-2004, 12:51 PM
From the factory there is one inlet pipe for water, then that splits off into 3 pumps (one for each bag) Then i believe there are also 3 pumps to empty the bags. If you post your email address i will take some digital pictures of mine and send them to you.



Brent Burtrum
2004 Mobius LSV

noneya
07-20-2004, 05:02 PM
The sac fittings are the same as waterbed fittings

ibboat75
07-23-2004, 01:30 AM
thanks for the info. you can just use the 1 factory pump, just slower to fill and drain, right?? cb
ibboat75@hotmail.com