PDA

View Full Version : Fitting Size



BWeber
06-13-2010, 09:40 PM
This might have already been posted, but I had trouble searching it.


Does anyone know the stock ballast quick connect fitting size that screws into the rear ballast bags on an 09 LSV?

I believe the fitting are two different sizes for fill line and drain line. Looking on WakeMakers website there seems to be a 3/4" fitting and a 1" fitting.

Would I need one of each size to connect my 750# FatSac?

After talking with Wakemakers it was determined that the 09+ balast has a 1" fitting for the fill/drain line and a 3/4" fitting for the vent line.

Thanks.

you da man
06-13-2010, 10:06 PM
If you don't get your answer on here, call Wakemarkers and leave a message. Like everyone says, they are a small and extremely busy operation but I've always had Jason call me back the same day and usually within a couple hours of my messages.

cab13367
06-13-2010, 11:16 PM
If you don't get your answer on here, call Wakemarkers and leave a message. Like everyone says, they are a small and extremely busy operation but I've always had Jason call me back the same day and usually within a couple hours of my messages.

Not sure about 09 but they are definitely 3/4" on my 06.

you da man
06-13-2010, 11:36 PM
08 are 3/4"