PDA

View Full Version : Exhaust noise



superfet
07-19-2010, 08:30 AM
Hi there.
I have a LSV -08 with the 325.
What have you guys done to reduce the noise from the exhaust pipes? Is the FAE the only possible solution or is there anything else you can do? I really like my boat but the engine noise is really annoying when you try to talk while driving.

Mike

jmvotto
07-19-2010, 10:07 AM
Mailbu has these slilent rider exhaust tips
scroll down 3/4 on page 1 to see the pic. i could not copy and paste it. it was too big and i could not resize it properly so here is the link.

http://www.wakeworld.com/forum/showthread.php?t=779429&highlight=krypt

Edit by Kaneboats: See pic three posts below.

phospher
07-19-2010, 03:43 PM
what's wrong with you? that v8 rumble is great. you know what they say, if it's to loud your to old :) just kiddin ya.

MI-LSV
07-19-2010, 05:17 PM
Mike,

I have the FAE and that was the main reason for getting it. Makes the boat super quiet at "no wake" speeds, and quiet enough when surfing to talk to the surfer.

Scott.

kaneboats
07-19-2010, 05:45 PM
Here's the pic referenced above:

jmvotto
07-19-2010, 09:32 PM
Here's the pic referenced above:

howd yo do dat??? dang. i tried for 15min......:p

h2oskierrick
07-20-2010, 01:26 AM
Exhaust noise? These boats don't have any exhaust noise. I am trying to figure how to make my boat sound right like the late 80's ski boats did. Any one remove their mufflers?

kaneboats
07-20-2010, 11:59 AM
howd yo do dat??? dang. i tried for 15min......:p

Right click, copy, save as "name". Right click on saved file, "open with" Paint. Image, stretch skew (fill in lower % for each value). Save. Post.

sandm
07-20-2010, 01:15 PM
I can't see where these silent ride tips would work real well with the wakeplate in the way?

kaneboats
07-20-2010, 01:42 PM
I looked at that too. Does it look to you like the angle of the cut at the end of the opening would match the angle of the wakeplate in the "all the way up" position?

sandm
07-20-2010, 03:23 PM
I have had to replace the exhaust flappers 2x this season(don't ask). with the wakeplate all the way up, those turndowns would just plug up as the plate would be up against them. not sure if you could make them longer and turn them down after the wakeplate, but I think that would look goofy..

superfet
07-22-2010, 10:51 AM
Thanks for all the replies! I would have liked to find something cheaper than the FAE, I will land on roughly 700$ with shipment and Swedish taxes for the FAE:( But it seems what IŽll end up with.