PDA

View Full Version : Tsunami 800 elbow adapter



Aquaholic
07-27-2010, 10:24 AM
Does anyone know if the 90 degree adapter on the Rule 700 ballast dump pump will work on a tsunami 800 or do I need to buy the one sold on wakemakers?

Aqua

moombadaze
07-27-2010, 10:34 AM
should be the same

cab13367
07-27-2010, 04:36 PM
Does anyone know if the 90 degree adapter on the Rule 700 ballast dump pump will work on a tsunami 800 or do I need to buy the one sold on wakemakers?

Aqua

Aqua,

If you buy the 800's from WM, they come with them. Otherwise, I didn't use the two that came with mine so if you want them, e-mail me your address and I'll send them to you for the cost of shipping.

Al

Aquaholic
07-28-2010, 10:25 AM
Cab, How did you attach the hose to the shorter threaded side? Was it a hose barb or did you attach it straight on with a clamp?

Aqua

cab13367
07-28-2010, 10:34 AM
Cab, How did you attach the hose to the shorter threaded side? Was it a hose barb or did you attach it straight on with a clamp?

Aqua

3/4 female thread x 3/4 hose barb bought from home depot. I wanted to minimize elbows to maximize flow rate so I went with a straight adapter instead of the supplied elbow.

Aquaholic
07-28-2010, 10:51 AM
Did you see the Tsunami 1200 had two styles? One was a NPT and the other is not, I wonder if other saw this and if there is 1 1/8 to 1 inch or down to 3/4 adpater.

Did you reuse the SC pump metal bracket with the 800?

Aqua

cab13367
07-28-2010, 02:52 PM
Did you see the Tsunami 1200 had two styles? One was a NPT and the other is not, I wonder if other saw this and if there is 1 1/8 to 1 inch or down to 3/4 adpater.

Did you reuse the SC pump metal bracket with the 800?

Aqua

I don't have any T1200's so can't comment.

I installed the T800's as fill pumps and did not use any brackets. I did not use them as replacements for the drain pumps as you are doing so can't help you with the bracket. Sorry.

Al