PDA

View Full Version : Tweaked my krypt hlcds



jmvotto
03-20-2011, 11:45 PM
Yesterday had a few minutes and finally lined the lower half of my pods with stinger roadkill ( like dynamat) to keep the sound from shooting down from the towers and out to the boarders.

http://i258.photobucket.com/albums/hh254/jmvotto/IMAG0121.jpg

http://i258.photobucket.com/albums/hh254/jmvotto/IMAG0122.jpg

http://i258.photobucket.com/albums/hh254/jmvotto/IMAG0123.jpg

http://i258.photobucket.com/albums/hh254/jmvotto/IMAG0124.jpg

Brianinpdx
03-21-2011, 12:30 PM
JMV - looks like a good job. If I went to the trouble of doing that I would in the future place a few strips of that stuff on the back rear wall of the can next to the crossover. It doesnt have to be pretty. It's just to kill the rattles and live sound some of these cans can have.

Overall where you pleased with the changes? how did it effect the sound for you?

-Brian

jmvotto
03-21-2011, 12:53 PM
Good idea I have another sheet. Won't be able to do a test til may. Boat is in storage.

dusty2221
03-21-2011, 01:09 PM
We installed ours this same way, but also lightly packed the cans with poly fill.

KG's Supra24
03-21-2011, 01:16 PM
Im interested to know whether or not you can tell a difference. I, of course, wont have the before and after experience. Let us know how much of a difference it makes.

viking
03-21-2011, 01:39 PM
We installed ours this same way, but also lightly packed the cans with poly fill.

I was going to ask why not put in a little poly fill. That's what Earmark recommended on my 770's. Takes the "tin" sound out of them.

Brianinpdx
03-21-2011, 02:27 PM
KG - It's a good idea and would help. But it also depends on the pod size in relationship to the driver thats inside. From what I see of JMV's cans, they look pretty small. Acoustically this can play a role in attenuating the drives response. bigger is not always better.

In his case, I still would dampen down these cans regardless. I'd expect it to help.

-Brian

EarmarkMarine
03-21-2011, 04:48 PM
We use loose polyester fiberfill or polyester batting specifically to retard the internal reflections that are absolutley coincidental at a particular frequency especially in the context of a round pod. So I would highly recommend this regardless of the pod type so that internal reflections do not influence the midbass cone which is sympathetic to this. But don't over do it by packing the pod full. Just fluff it up and lightly fill. In order to damp the pod itself, Bullet HollowPoint uses a spiral of dense foam which is the most effective killer of resonance I have seen to date. Next up and less messy would be to use Dynamat, Roadkill, Hush this or that or other damping mat. You don't have to cover the entire area of the pod's internal surface to be fully effective. In any case, I like the extra steps to try and get the most and best performance from your gear. Good call.

David
Earmark Marine

jmvotto
03-21-2011, 04:57 PM
We installed ours this same way, but also lightly packed the cans with poly fill.

Dusty I did that too, the poly fill that is.

jmvotto
03-22-2011, 09:42 PM
Thanks Brian , did the backs as well one pretty one not so much. Lol I had a left over sheet.

http://i258.photobucket.com/albums/hh254/jmvotto/IMAG0128.jpg

http://i258.photobucket.com/albums/hh254/jmvotto/IMAG0129.jpg

FYI I did put the loose poly fill back in.