PDA

View Full Version : heater switch



gus 08 mobius lsv
04-07-2011, 01:20 AM
i'm doing a heater install and i wanted to buy a switch that sc uses if you get it installed factory. order it from a dealer or over the net?? since i have no current dealer... anyone satisfied with their dealer please give me a name and number to order parts thru.

wolfeman131
04-07-2011, 08:46 AM
Call Atlanta Marine & ask for Heidi. She will hook you up.

678-482-6499

http://www.atlantamarine.com/

jmvotto
04-07-2011, 09:35 AM
Mike , parts manager at silver lake, NY just ordered me one for pick up on the 21st.

He could probably send you mine and then replace mine in that couple weeks.

Phone: 585.237.5185
its in western NY

http://www.silverlakemarine.com/includes/page.asp?page=20&sys=1&bhcp=1

gus 08 mobius lsv
04-07-2011, 10:53 PM
ok thanks guys

jmvotto
05-15-2011, 07:31 PM
ok thanks guys

anyone have the schematics for the factory heater switch??

I thinking of using this if i can move my fourth ballast switch to the g111 plate like brain rinse did..

Is it the same as the ballast switch?



Thanks

cab13367
05-16-2011, 01:36 AM
anyone have the schematics for the factory heater switch??

I thinking of using this if i can move my fourth ballast switch to the g111 plate like brain rinse did..

Is it the same as the ballast switch?



Thanks

Joe,

See post #16 on this thread:

http://moomba.com/msgboard/showthread.php?t=10657&page=2&highlight=Heater+switch+wiring

Might help you with GI light switch issue as well.

Al

jmvotto
05-16-2011, 10:26 AM
Al, Thanks i was looking for that thread last night and forgot wher it was. I wsh we had like a favorite tab on this site....:D

jmvotto
05-16-2011, 11:42 PM
Al, the heater switch i have is different than the ballast. I did a test and found the flowwing for those that have one on my bench.

looking at the back of the switch( sorry i suck at ms paint brush) 1 to 4 right /left column

Position 1 right column negative
Position 2 left column Low
position 3 left cloumn postive
position 4 left column high


http://i258.photobucket.com/albums/hh254/jmvotto/IMAG0186.jpg

http://i258.photobucket.com/albums/hh254/jmvotto/IMAG0187.jpg

wolfeman131
05-17-2011, 09:04 AM
JV - you have a granite topped workbench?!?!?

high class, baby. high class.

dusty2221
05-17-2011, 10:24 AM
^ Ha! I wouldn't recommend using a hammer on that pretty work bench!

jmvotto
05-17-2011, 10:53 AM
JV - you have a granite topped workbench?!?!?

high class, baby. high class.

Nope, they garage pics did not come out as well so i shot them again in the kitchen:D wife was sleeping so i got away with one...

cab13367
05-18-2011, 03:11 AM
Joe,

That's interesting because I used the stock GI ballast switch, changed the faceplate out to the heater faceplate, and am using it as a heater switch. So were you able to use the heater switch as a ballast switch?

Al

cab13367
05-18-2011, 03:21 AM
Never mind - reread your post. Looks like you are using this as a heater switch and was just pointing out that it's different than the ballast switch. Got it.

jmvotto
05-18-2011, 10:04 AM
Never mind - reread your post. Looks like you are using this as a heater switch and was just pointing out that it's different than the ballast switch. Got it.

yep I ordered it directly from SC through the dealer. Now my real decition is to move the g1 to the g1111 location and replace the heater switch in the dash. or just mount the heater craft switch and have all three speed settings.
:confused:
any pro con input would be great

cab13367
05-18-2011, 10:22 AM
yep I ordered it directly from SC through the dealer. Now my real decition is to move the g1 to the g1111 location and replace the heater switch in the dash. or just mount the heater craft switch and have all three speed settings.
:confused:
any pro con input would be great

I'd move the GI switch and use the factory heater switch for a factory look. I hooked up the med and high settings. I don't ever wish I had the low setting and in fact, I don't think we ever use the medium setting. It's on high or it's off.