PDA

View Full Version : Question for the ski sky fellas



lsvboombox
05-16-2011, 09:26 AM
At the end of the day I break down my launch ski sky and was wonder if any of you guys have just removed this bushing(at the base of the seat tower)?

http://skyski.com/store/images/detailed/0/50-0117_Urethane_Board_plug.jpg

It really makes getting the wing in and out a bitch. Talked to Brad at ECH and he said you can remove it but it does provide a little protection for the board.. Anybody remove it and if so has it caused any damage? thx

Ian Brantford
05-16-2011, 01:33 PM
Do you use binding slime on that? It helps immensely.

murraymoomba
05-17-2011, 11:43 PM
I took ours out over 2 years ago and no problems yet. The worst part is taking the tower off to get to it.

DOCDRS
05-18-2011, 12:04 AM
I left mine in, remove the strut all the time , a little dish soap works wonders, but if your careful even thats not needed , at least for mine.

lsvboombox
05-18-2011, 08:29 AM
Thx for the replys i will try slime or soap and see if that makes it easier otherwise i may yank it....

murraymoomba
05-19-2011, 12:22 AM
The LE t-bars do not have anything like that. The top of the t-bar fills up the space and it is only connected to the tower, it does not touch the board.