PDA

View Full Version : enzo sac



NLindellDC
05-18-2011, 01:41 PM
Used enzo sac. No rips or tears. I did, however, use PVC cement on the 3/4" flo-rite to quick connects (1 on top, 1 on bottom), so you won't be able to remove those--but on the bright side, they don't pop off :)

$250. Shipping from Corpus Christi, TX

saskie99
05-18-2011, 02:11 PM
why are you selling?

NLindellDC
05-18-2011, 04:02 PM
ironically, I bought an Enzo and it won't fit. The new 2011's separated the rear and mid compartments so I need more of a V-drive sac only.

sailing217
05-19-2011, 11:03 AM
Welcome to Centurioncrew lol. I have an Avy but this website is great too.

I haven't seen the 11's, but if it's a pvc divider and not fiberglass then it would be an easy choice to cut/remove. I had a pvc that was just bolted in there that I removed to get an Enzo sac under the bench seats. If fiberglass I'd just keep mid-ship tanks and custom V-drive sac too.

Good price on the sac.

dusty2221
05-19-2011, 11:10 AM
Would you be interested in trading for the 1100 pound sac that I have?

NLindellDC
05-20-2011, 10:02 AM
I would, Dusty, except that I already bought and used one :(