PDA

View Full Version : phase 5 surfboard repair



jmvotto
07-03-2011, 11:59 PM
whats the best way to repair the top layer on a phase 5 board. the hard enamel chipped away at the nose and on the side.i think one of my kids dropped it. it is thier board though:rolleyes:

wolfeman131
07-04-2011, 12:15 AM
My kiddos knocked over my Inland Surfer and left a crack in the epoxy. IS sells a repair kit that color matches the epoxy and sandpaper (4 or 5 grades, end with a light wet sanding) to smooth it all out.

loudsubz
07-04-2011, 04:37 PM
I just fixes my inland surfer. Got the repair kit from IS but you can always use GOOP marine fix fast epoxy. Same thing in 2 containers, just mix and in 5 min it's hard. Also put a piece of plastic from a sandwidge bag down on the epoxy when done and smooth it out. When it dries just peel away and no sanding needed.

I sanded mine to cut it down a bit than polished it with my porter cable, smooth as a babies..... You know

sandm
07-04-2011, 05:30 PM
my broadcast and is 4-skim have repairs with the epoxy. don't look pretty, but work :)