PDA

View Full Version : Pass-through gate



DKong
07-05-2011, 05:14 AM
Hey y'all,

I'm looking to build a gate for my pass through area to keep the wind down. Has anyone seen a cut to fit kit or something or am I going and buying some teak and doing some carpentry? (Not much of a carpenter :( )

I couldn't find any write ups on here so any ideas are appreciated. Thanks!

kaneboats
07-05-2011, 10:37 AM
It's on here somewhere with pictures. Try searching "windscreen" and stuff like that.

kaneboats
07-05-2011, 10:38 AM
Try this thread:

http://moomba.com/msgboard/showthread.php?t=10662&highlight=windscreen

jmvotto
07-05-2011, 11:48 AM
mine is canvas with snaps

http://moomba.com/msgboard/showthread.php?t=6146&highlight=wind+blocker post # 8

jester
07-05-2011, 02:17 PM
I also build one. I came up with another idea this weekend in that I will make a seat back out of it since I have more people sitting in the bow looking forward.

http://moomba.com/msgboard/showthread.php?t=11056

cab13367
07-05-2011, 02:41 PM
mine is canvas with snaps

http://moomba.com/msgboard/showthread.php?t=6146&highlight=wind+blocker post # 8

Joe, my boat previous to this one had a snap cover like yours from the factory but the snaps were on the front facing forward instead of on the walkway facing each other. It fit really snug whereas yours looks pretty loose?

I use my snap in bow cover as my wind block. Works great but takes a little longer to put on.

DKong
07-05-2011, 10:15 PM
Try this thread:

http://moomba.com/msgboard/showthread.php?t=10662&highlight=windscreen

Not what I had in mind, but I think that would work, looks good and the price seems about right, thanks!!

NCSUmoomba
07-11-2011, 06:23 PM
I have built one that works well. Look for the "Ruby Roo" mods thread.

Canuckle Head
07-11-2011, 08:43 PM
I have built one that works well. Look for the "Ruby Roo" mods thread.

I used this thread as the inspiration to do mine and I love it! I think it's called "My Mods to the Ruby Roo" . Yup, here's the link: http://www.moomba.com/msgboard/showthread.php?t=10662&highlight=Mods+Ruby

jmvotto
07-11-2011, 10:14 PM
Joe, my boat previous to this one had a snap cover like yours from the factory but the snaps were on the front facing forward instead of on the walkway facing each other. It fit really snug whereas yours looks pretty loose?

I use my snap in bow cover as my wind block. Works great but takes a little longer to put on.
Al.l it was not snapped to the window so it does look a little loose. but not as tight as the bow cover either.

Canuckle Head
07-12-2011, 01:15 PM
Here are a few pictures of mine:
http://i702.photobucket.com/albums/ww30/wedeh/Watersports/DSCF0011.jpg
http://i702.photobucket.com/albums/ww30/wedeh/Watersports/DSCF0010.jpg
http://i702.photobucket.com/albums/ww30/wedeh/Watersports/DSCF0013-1.jpg