PDA

View Full Version : Securing Wires



scoot_gt
07-19-2011, 01:39 PM
Hey guys -

Anyone have a neat trick to secure wires up under the fiberglass lip around the front of the bow?

lsvboombox
07-19-2011, 01:57 PM
this is the only idea i can think of

http://www.coolerguys.com/840556021568.html

LakePerson1952
07-21-2011, 10:31 AM
this is the only idea i can think of

http://www.coolerguys.com/840556021568.html

I have used those tie anchors a lot with great results mostly. A common element when they don't work is when used on surfaces that get warm or hot - the adhesive comes loose. Also, smoother surfaces work much better than rough.

Could be better to remove the sticky pad and epoxy the tie anchor to the underside of the f/g.

cab13367
07-21-2011, 11:18 AM
Hey guys -

Anyone have a neat trick to secure wires up under the fiberglass lip around the front of the bow?

There should already be a wiring loom attached up in there. Reach in there towards the bow light and see if you can feel it.

I ran new speaker wires to my bow speakers and i seem to recall attaching it one handed with a zip tie to the existing loom.