PDA

View Full Version : What Do You Need? What's Lying Around Or In A Box Somewhere? Giving Season.



kaneboats
11-11-2011, 11:27 AM
OK, the speedo thread got me thinking. Lots of us have old boat junk sitting in boxes that we'll never use. Others may have older boats, limited budget, whatever. We tried to do something like this once before. Things are slow so let's try again. If you have something you'd give away if a fellow board member needed it and would pay the shipping, list it here. Pay it forward. You never know when you'll need something too.

I have a box with a GIII three outlet manifold, a ballast strainer I don't use, a stainless grab handle that looks like a rounded "U" I picked up for a different boat and I know I'll never use, an extra original sprinkler valve (Orbit 3/4" I think), and more stuff I'll add if I get a chance to look around tonight. If anyone needs any of this, send me a PM.

How about you? What do you have? What do you need (yea, I know, a new Mojo. Let's keep it real.)

Added: Stock black windshield mirror mount

brain_rinse
11-11-2011, 11:45 AM
I have the following:
stock black metal windshield mirror mount
complete trailer brake caliper with pads
a few trailer lug nuts
a short piece of radiator hose that could be used to make a fake-a-lake

rsinger
11-11-2011, 11:53 AM
4 factory, in boat, speakers
bunch of used vinyl

deerfield
11-11-2011, 12:11 PM
I have two of these to give away.



stock black metal windshield mirror mount

04OUTBACK
11-11-2011, 12:40 PM
2 Orbit Sprinkler Valves 3/4" New in box.
i'll dig around to see what else..

jmvotto
11-11-2011, 01:08 PM
I have a three port manifold, ballast strainer,

some extra 1 " in 3 /4 " ballast hose around 5 feet each.

bergermaister
11-11-2011, 02:52 PM
Two Rule uh, 700 pumps I think they are? Both with 3/4" fittings
Half dozen or so 3/4" fly-high quick connects and fittings (W742's and W736's)
Bag full of 3/4" hose clamps
Couple fly-high W730 quick-twist thread adapters (for hand held pump)
Couple 3/4" hose barb T-fittings
Soon to have four 3/4" black thru hulls with 90-degree (still need to find something to plug them with when they come out)
Few oznium blue led couple holder modules
Stock Speedo gauge - Beede, white face, from a 2001.

Probably some other odds and ends laying in the same box...

rdlangston13
11-12-2011, 12:29 AM
Todd aka 11 outback v did this with me, except he have me a part for free and paid the shipping on it. Stand up guy! Wonder what he's been up to

wolfeman131
11-12-2011, 11:12 AM
He's been working on something big, but I'll leave it up to him to let ya know what it is.

ChrisK
11-12-2011, 04:23 PM
I've got a few rubber inserts or whatever you want to call them for the inside of tower clamps for things like speakers and racks. I have a few different thicknesses. Also might have a small slalom mirror laying around.

Kidder522
11-12-2011, 05:04 PM
Hey Rsinger. What color are your speaker covers. I have a couple where the screw holders are broken. My 2003 Outback speakers are off white, well faded white I guess.

rsinger
11-12-2011, 05:49 PM
Hey Rsinger. What color are your speaker covers. I have a couple where the screw holders are broken. My 2003 Outback speakers are off white, well faded white I guess.

Here your go. It's all one piece

http://i1203.photobucket.com/albums/bb397/rsingerwpg/speaker.jpg
http://i1203.photobucket.com/albums/bb397/rsingerwpg/speaker2small.jpg

Is it what you're looking for? How broken? I just noticed that there is a crack in the plastic in at least one of mine. The one I took the picture of is good.

newty
11-12-2011, 11:25 PM
Two Rule uh, 700 pumps I think they are? Both with 3/4" fittings
Half dozen or so 3/4" fly-high quick connects and fittings (W742's and W736's)
Bag full of 3/4" hose clamps
Couple fly-high W730 quick-twist thread adapters (for hand held pump)
Couple 3/4" hose barb T-fittings
Soon to have four 3/4" black thru hulls with 90-degree (still need to find something to plug them with when they come out)
Few oznium blue led couple holder modules
Stock Speedo gauge - Beede, white face, from a 2001.

Probably some other odds and ends laying in the same box...

I'll take youe ballast stuff. I always have a use for extra ballast stuff.

Kidder522
11-13-2011, 01:17 PM
rsinger. Upon further investigation and looking at some pictures, my speakers are grey, and a different front design. Thank you for all your pictures and help. I think if I were to replace them, I would do all 6 instead of having different colors.

Thanks Again.

kaneboats
11-14-2011, 11:11 AM
All right, go through your boxes. It's the giving season. What else you got?

Jet
11-14-2011, 12:49 PM
Hey kaneboats, how about a pic of the handle you have, I might want that. I just gave away a shoty wet suite at hydrous yesterday. I will see what else I have at home tonight to push forward. Hey Dusty..have any stereo stuff?? lol. Those 6-month old amps are getting old!!
Jet

T100
11-15-2011, 03:43 PM
Does anyone have an old stock Perfect Pass that they have laying around from a new upgrade?

ChrisK
11-15-2011, 04:20 PM
^^^ What he said (T100)

ChrisK
11-15-2011, 04:22 PM
Also, how does everybody feel about having this as a sticky thread? On the 'bu forums they call it their "Perpetual Freebie Thread" and it's in the classifieds section... I thought that was kind of cool.

But I also like the idea of the season of giving

Shaft
11-16-2011, 06:06 AM
Would love it someone wold find a swim platform for a 02 mobius white, asking too much do you think?Oh and a rad a cage!Set for the summer!

newty
11-16-2011, 12:42 PM
I have a Fossil swim platform with a small amount of damage. With a little gel repair or creative fixin it would make a good freebie. You pay shipping.
Shaft if you rhino lined it or coated it with something you could make it any color you want.

rc5695
11-16-2011, 12:59 PM
I have a Fossil swim platform with a small amount of damage. With a little gel repair or creative fixin it would make a good freebie. You pay shipping.
Shaft if you rhino lined it or coated it with something you could make it any color you want.
pics please?

newty
11-16-2011, 01:31 PM
pics please?

I'll try to get you some over the next day or two. It had a stainless hand rail for a supra on it so there are holes from where it was mounted. You could buy one of those Supra rub rails to mount and it would cover up most of the damage.

newty
11-29-2011, 10:50 AM
pics please?

Sorry bro, totally spaced it with the holidays. I'll try to get pics for you this week.

cab13367
11-29-2011, 12:09 PM
I've got the following to give away. Just pay for shipping. Send me an email to alcab63@frontier.com if interested as I don't check this site every day. I'm in the Portland, OR area.

I've got 4 of the black plastic thru hulls (replaced mine with stainless). One of them is shown below:
http://i250.photobucket.com/albums/gg276/cab13367/IMG_0915.jpg


I've got 11 cupholders that I pulled out when I replaced mine with stainless. Not sure of the exact size.
http://i250.photobucket.com/albums/gg276/cab13367/IMG_2691.jpg
http://i250.photobucket.com/albums/gg276/cab13367/IMG_2692.jpg

Box of stock ballast parts. The black quick connects are NOT included. I am keeping those.
http://i250.photobucket.com/albums/gg276/cab13367/IMG_6501.jpg

newty
12-05-2011, 11:46 AM
Here's the platform up for grabs!
12883128841288512886

cab13367
12-05-2011, 03:33 PM
Newty,

Just curious - what did your replace it with and why?

Al

newty
12-05-2011, 06:46 PM
The bottom had some delamination, all cosmetic but SC warrantied it right after I bumped the rail and put a bug chip in it. I have the same platform now with the new gray moomba decking.

Shaft
12-05-2011, 08:41 PM
Sent you a pm would love to pick it up off you cheers

newty
12-05-2011, 09:01 PM
Sounds like its headed to Austrailia!

kaneboats
01-03-2012, 11:17 AM
Did he really want it?

newty
01-03-2012, 12:40 PM
Yea we've been emailing back and forth but its looking like shipping is going to be crazy expensive.

gus 08 mobius lsv
01-03-2012, 02:53 PM
i had some issues with my perfect pass not working right it wouldn't turn on ...it just beeped i spent a month working with perfect pass about this and they shipped me a new module twice and never sent a prepaid slip to send the old ones back i called once and told them about it and still never got it and they never bothered me one time so i got 2 modules collecting dust. i wanna keep one on hand in case mine takes a crap on me but i think this is about a 500 dollar item. thought about selling it but thought that might be bad karma...my luck i'd blow my engine trying to make a few bucks off a free item as it was warrantied. turns out the issue was in the wiring not the module so if anyone is in need of this get at me... i'll give one away if you pay shipping

kaneboats
01-03-2012, 03:17 PM
Outstanding! I'm sure there's a need here. RC, do you have PP????

brain_rinse
01-03-2012, 04:50 PM
i had some issues with my perfect pass not working right it wouldn't turn on ...it just beeped i spent a month working with perfect pass about this and they shipped me a new module twice and never sent a prepaid slip to send the old ones back i called once and told them about it and still never got it and they never bothered me one time so i got 2 modules collecting dust. i wanna keep one on hand in case mine takes a crap on me but i think this is about a 500 dollar item. thought about selling it but thought that might be bad karma...my luck i'd blow my engine trying to make a few bucks off a free item as it was warrantied. turns out the issue was in the wiring not the module so if anyone is in need of this get at me... i'll give one away if you pay shippingoff topic, but can you describe the wiring issue you had and how you fixed it?

bergermaister
01-03-2012, 05:46 PM
I can add to that and throw in a PP throttle control wire that hooks up from the linkage to the servo. Gary at PP sent me 2 lengths to try and use the one with the best fit. I asked about shipping the shorter one back and he said to just keep it. No idea what it's worth but if anyone needs one it's yours.

gus 08 mobius lsv
01-04-2012, 12:17 AM
off topic, but can you describe the wiring issue you had and how you fixed it?

not really sure just after 2 modules not fixing it they sent me a wiring harness so i put it on and that did the trick

rdlangston13
01-04-2012, 10:38 AM
not really sure just after 2 modules not fixing it they sent me a wiring harness so i put it on and that did the trick

i need pp!!!

gus 08 mobius lsv
01-04-2012, 05:59 PM
i need pp!!!

glad my boat came with it not know how important it really is i thought it was an option i could live without but boarding behind the boat when it wasn't working sucked so it really is worth the money in my opinion.

rdlangston13
01-04-2012, 06:02 PM
glad my boat came with it not know how important it really is i thought it was an option i could live without but boarding behind the boat when it wasn't working sucked so it really is worth the money in my opinion.

you still have that module? and aside from the module, what else would i need to have a complete system?

wolfeman131
01-04-2012, 11:38 PM
David,

I think you will need the display for the dash and the wiring harness (which you might also get for free from this thread!).