PDA

View Full Version : new board racks



wannajet
03-04-2012, 10:06 AM
This has probably been covered but i could not find it . So here it goes i have the 99 mobius and i am in need of new board racks and i am haveing a hard time finding ones that fit the oval tube on my tower, so any suggestions on name brands would help. thanks

you da man
03-04-2012, 02:14 PM
Have you tried ebay? There's usually a seller on there that has the OEM style racks at a very reasonable price.

wolfeman131
03-04-2012, 02:43 PM
Have you tried ebay? There's usually a seller on there that has the OEM style racks at a very reasonable price.

yeeeeep. Just under 100 bones:

http://www.ebay.com/itm/Moomba-Four-Winns-Oval-mount-Wakeboard-Rack-LIPBOATING-/190642191213?pt=LH_DefaultDomain_0&hash=item2c6328fb6d

better deal:

http://www.ebay.com/itm/Fixed-Rigid-Wakeboard-Racks-For-Moomba-Supra-Towers-/270919099470?pt=LH_DefaultDomain_0&hash=item3f1409644e

vandy654
03-04-2012, 08:22 PM
I've got the ones from LIP, seem to be holding up well.

riderite
03-05-2012, 12:17 PM
You also have the option to add a complete rack with base plate instead of just the forks. Here is a picture of the clamp..13519

KSmith
03-05-2012, 12:55 PM
I've got the ones from LIP, seem to be holding up well.

^^^ I use the LIP ones myself. I have the Roswell swivel racks attached to the mid cross bar and the LIP forks to the lower crossbar

bergermaister
03-05-2012, 01:08 PM
Have you guys seen any of the fixed type for the oval tube that are a surf/wakeboard combo? I'm thinking of trading up my Bullet Lines combo racks for something else. I'd prefer to go with the oval tube style instead of clamp style.

riderite
03-05-2012, 02:46 PM
The base I posted above comes standard with vinyl combo forks & can be swapped out to polished combo forks also.. Available with the 1 7/8" oval clamp also..

New Guy
03-05-2012, 03:38 PM
Riderite I have a set of factory racks on my 02 that I cannot keep the rubber inserts in. I cannot keep the rubber in to save my butt. I was wondering what the coating was on those racks? I have access to a waterjet and I am thinking of making my own racks I just haven't found a good coating yet.

Thanks

riderite
03-05-2012, 03:48 PM
Riderite I have a set of factory racks on my 02 that I cannot keep the rubber inserts in. I cannot keep the rubber in to save my butt. I was wondering what the coating was on those racks? I have access to a waterjet and I am thinking of making my own racks I just haven't found a good coating yet.

Thanks

It is a vinyl dip that we worked for a couple years on to get it perfect. It holds up very well in the elements with no fading, peeling, or cracking. If you are gonna make your own rack feel free to give me a call and I will set you up with forks for them, that way you will not have to go through the trial and error and end up spening a ton of money.. Let me know if there is anything I can do..

New Guy
03-05-2012, 03:54 PM
Sounds great.

wannajet
03-05-2012, 10:00 PM
thanks for all the advice and options , that is the info i was looking for . I like the idea of the rack that is fully coated because i have seen racks with the rubber strips that come loose if you move board sideways in rack. thanks again all and i will post when i buy them.