PDA

View Full Version : Super dumb question



chawk610
04-27-2012, 02:07 PM
Ok...does the backseat of my LS come off? I have lifted on it a few times but it feels really "attached"?? I wanna see what's doin' under there.

ian ashton
04-27-2012, 02:37 PM
Try a bigger hammer, or in this case pry bar.

chawk610
04-27-2012, 02:47 PM
Thanks! I guess that means there is no access...

jpetty3023
04-27-2012, 03:02 PM
Chawk all I can do here is chuckle, get up off the floor, and chuckle some more!! I'm sorry I'm not familiar with your year model and make but between the title name and the simple answer given I'm bout to fart over laughter.

chawk610
04-27-2012, 03:18 PM
:| please don't fart on my behalf... I'll just sit here feeling stupid

Nobodyrides4Free
04-27-2012, 03:22 PM
UH.......Owners Manual? I feel for ya brother. Dont let these guys get you Down.....hell I was laughing at their comments.....

chawk610
04-27-2012, 03:26 PM
I have the manual at home... I will look later I reckon. I chuckled too! Smart Azzes

Nobodyrides4Free
04-27-2012, 03:32 PM
Im still Laughing. Thats Funny stuff

ian ashton
04-27-2012, 04:37 PM
Here is the owners manual;
http://www.moomba.com/downloads/owner_manuals/moomba_08.pdf

From that, it looks like the ballast is under the seat;
http://www.moomba.com/msgboard/attachment.php?attachmentid=14039&d=1335555416

chawk610
04-27-2012, 05:07 PM
Ok... thanks, I see the outback seat folds up... didn't say the mobius one did though.

Salyers
04-27-2012, 05:46 PM
On the 09' the seat comes off and the ballast tanks are underneath. First time I took it off it was difficult. Not the easiest to put back on. Works better with 2 people.

chawk610
04-27-2012, 05:54 PM
Thank you for the clear consise answer... 11 posts in :) Yep, it's Friday on the old Moomba board!

SEARK
04-27-2012, 06:17 PM
07 slides out, but is tight.

chawk610
04-27-2012, 06:51 PM
Cool, I will try both, I bet it slides cause I have tried pulling up with no success.

jpetty3023
04-27-2012, 09:21 PM
Sounds like you might need a degree in engineering to get this one figured out Chawk wow!


Sent from my iPhone's cooler than your droid utilizing Tapatalk

viking
04-28-2012, 12:15 AM
did u ever try bending down and just looking under the seat? :)
Just a thought Chawk.

jpetty3023
04-28-2012, 12:39 AM
hot dam!


Sent from my iPhone's cooler than your droid utilizing Tapatalk

dru1974
04-28-2012, 04:30 PM
You have to lift slightly and pull out. There are 2 hockey puck like things that sit in notches in the hard ballast tanks


---
I am here: http://tapatalk.com/map.php?s4iwf5

harmsway
04-28-2012, 04:55 PM
Chawk
I find the best way to remove the seat is with 2 people. Have one person lift the seat in the center allowing the seat to curve 4-5" then the second person pull up on one of the ends as you twist out. Be extremely careful of you speaker cover as it will come in contact with the seat and break the speaker cover. To install the seat slide one end in place have one person to pull up on center as the other person pushes down and maneuvers the seat in place. It is tight and will feel like you are going break the seat, but it will flex a lot.

chawk610
04-30-2012, 09:56 AM
Got it... as for bending down and looking under... uhh, no, didn't try that.