PDA

View Full Version : Rule Aerator Pump 700 GPH



4fish4
06-01-2012, 03:56 PM
I notices that my Rule Aerator Pump 700 GPH (front pump to empty ballast ) is crack. Can someone tell me is this is the right part before I order a new one

http://www.jamestowndistributors.com/userportal/show_product.do?pid=43200&familyName=Rule+Non-Automatic+700+GPH+Bilge+Pump#1466914670

jmvotto
06-01-2012, 04:21 PM
nope that is a bilge pump Go to walmart and get a tsunami 800 gph or your dealer may have some rule pumps the left over.

or try this site if you want rule.

http://www.cgedwards.com/Rule/rule03.html

Rgar
06-01-2012, 04:23 PM
That is not the right pump. That is a bilge pump. You need a pump that has an inlet and 3/4" outlet. Have a look at the 800 gph Tsunami pumps on wakemakers.com. They are cheap and decent replacements for that pump.

4fish4
06-01-2012, 07:05 PM
so this should do the job, Right ?
http://www.wakemakers.com/attwood-tsunami-ballast-pump-800.html

Rgar
06-01-2012, 11:50 PM
Yeah that's what I used to replace the stock 700gph pumps. You may have to order a straight connection. The elbow style that it comes with did not work in my 03 LSV.

4fish4
06-02-2012, 03:04 PM
Thank you guys

murraymoomba
06-13-2012, 10:49 PM
Did this pump come with the same type plug in?




so this should do the job, Right ?
http://www.wakemakers.com/attwood-tsunami-ballast-pump-800.html

jmvotto
06-13-2012, 10:57 PM
Did this pump come with the same type plug in?

No you can splice the plug off the rule or order te deutsch plugs from batts racing and solder yourself.

http://www.deutschconnector.com/products/deutsch_dt_series_connectors/

squeeg333
07-06-2012, 12:57 PM
I think I might have the same issue with my ski locker drain pump - I always seem to have water in the ski locker after using it and the IBS.

Do you guys know if the Tsunami will work with the stock aluminum Rule pump mount that comes with these boats? I'd like to swap this pump out today if possible, but the only place I've found for the Tsunami mount is Wakemakers.

mnpracing
07-06-2012, 01:05 PM
I think I might have the same issue with my ski locker drain pump - I always seem to have water in the ski locker after using it and the IBS.

Do you guys know if the Tsunami will work with the stock aluminum Rule pump mount that comes with these boats? I'd like to swap this pump out today if possible, but the only place I've found for the Tsunami mount is Wakemakers.

It will drain better without the mount, just let it lay in the locker.

squeeg333
07-06-2012, 01:57 PM
Well ya know, that's a great point! Thanks!!

jmvotto
07-06-2012, 02:15 PM
It should fit. As sated try without