PDA

View Full Version : V drive sensor



Cactus371
07-19-2012, 06:35 PM
How can I test the oil sensor on the v drive. My v drive light is coming on oil level is good.

ga-lsv05
07-19-2012, 06:40 PM
Coming on above 1200 rpms?

2005 mobius lsv 2900lbs ballast

Cactus371
07-19-2012, 07:17 PM
It stays on all the time no matter the rpm.

ga-lsv05
07-19-2012, 07:22 PM
From what I gather, its a simple on off pressure switch like an oil pressure sender. With no pressure on it you should see less than 1 ohm across it and an open circuit pressurized. Using a dvom

2005 mobius lsv 2900lbs ballast

Cactus371
07-19-2012, 08:01 PM
Thanks I'll test it tonight

Chandosdave
08-13-2012, 02:36 PM
Were you able to determine if the sensor was the issue, or is there a different problem?