PDA

View Full Version : Looked what showed up today



jmvotto
08-31-2012, 12:07 AM
http://i258.photobucket.com/albums/hh254/jmvotto/F44E9546-A83A-4AAD-A096-1AC0CB7FC117-6540-00000728C16B9D7A.jpg

Flo Rite box....:)

04OUTBACK
08-31-2012, 12:24 AM
Whatcha working on. Now?

jmvotto
08-31-2012, 12:29 AM
Whatcha working on. Now?

Extending the 3/4 vent on the the 1180 basement bag to the top of the bag in the bow.

Was gonna take off early tomorrow to go surf with anther Moomba member and a few others.
90 sunny and 20 mph winds, can't really surf in 3 ft rollers. Guess I test the bag another day:(

04OUTBACK
08-31-2012, 08:21 AM
Get that all from flo rite or wake makers
?

jmvotto
08-31-2012, 09:45 AM
flow rite, wake makers did not have 1" plugs

WM hose is cheaper but the quick connects are more but it was a wash except the 1" plugs i wanted when i disconnect the bags.

KSmith
08-31-2012, 10:14 AM
Careful with those plugs. I bought some and when I installed them they fit perfectly inside the quick connect but when trying to close the red latch to secure them the latch broke. I had to replace teh quick connect. They don't seem to fit quite right with the quick connect latch. Now they are in a box somewhere in the garage...

Boonejeepin
08-31-2012, 11:10 AM
My experience is that the 1"
plugs do not work. The 3/4" plugs seem to work fine. As said above be gentle when inserting them.

I had to ghetto fab a plug using some parts from homedepot, glue, and a male style quick disconnect.

jmvotto
08-31-2012, 11:25 AM
Thanks, i will certainly double check and be careful with the 1" plugs. My 3/4 work great.. its really only for storage or if i move a bag over to surf with less crew. I dont want to accidentally hit the fill without the plug, would not be good....

moombadaze
09-01-2012, 03:25 PM
add a inline pvc valve (home depot) so when you disconnect the bag you just close the valve--thats if the plug does not work