PDA

View Full Version : Tower lights



motosno963
02-19-2013, 02:44 AM
I have a feeling ill get beat up on here again because I want to spend my money ( I have a few words to say but ill bite my lip and keep it in:)) but I want to take off an old ugly light bar I have on top of my tower..anyone know where to get a nice light from?

mmandley
02-19-2013, 04:52 AM
I have a feeling ill get beat up on here again because I want to spend my money ( I have a few words to say but ill bite my lip and keep it in:)) but I want to take off an old ugly light bar I have on top of my tower..anyone know where to get a nice light from?

Welcome back bro, missed you man. Dont worry about those who hated on you last time its no big deal man.

Light Bars,

Monster makes a sweet one
http://shop.monstertower.com/p-43-monster-tower-4-light-bar.aspx

As well as Roswell.
http://www.roswellwakeair.com/wakeboard_tower_light_bars/

Aerial
http://www.wholesalemarine.com/p/AWT-BT-5LITE225-PA/Aerial+Wakeboard+Tower+Lightbar+5+lights.html

KG's Supra24
02-19-2013, 09:52 AM
http://www.bulletlines.com/wakeboard-tower-lights-s/7.htm

http://store.earmarkcaraudio.com/Xcart/home.php?cat=262

jmvotto
02-19-2013, 10:13 AM
Moto, welcome back.

Bakesonline has some as well as the above list

http://www.bakesonline.com/searchresult.aspx?CategoryID=519

kaneboats
02-19-2013, 10:24 AM
I put one of those little dome anchor lights on my tower after I broke the other one about 5 times. The thing was more epoxy than plastic by the end. I haven't bumped the new one at all and only used it one time (no night boating in FL unless it's gator season).

jstenger
02-19-2013, 01:20 PM
I know you stated that you already had tower speakers, but this is what I went with from Aerial. Sorry for the low quality pic, it was all I had.

http://i1217.photobucket.com/albums/dd382/Joestenger/2012-08-10182627.jpg

Assuming that you have the Rad-a-Cage tower like mine, you will have an issue with the Areial clamps since the rubber inserts only go as small as 1 3/4", and our tubing is 1 5/8". I took a length of black 1 1/2" ABS plastic pipe and cut it to the width of the clamps and then cut it length wise in half. The two pieces snap over the tower making the diameter larger. The black ABS blends in nicely with the black rubber inserts making them look like one piece. By the way, I ended up moving the speaker/light bar to the forward tube. They looked and fit much better.

motosno963
02-19-2013, 05:47 PM
i have a light bar from liquid audio? and its a cheap square bar with some lights mounted on it..and if it was like the mounts i had on the old cans they used duct tape for a spacer..this summer im going to fix the boat, replace the vinyl and carpet.. thanks for the imput ill take a look..i also need a new nav light on top broke so i am going to get a aluminum one