PDA

View Full Version : LSV locker support screw anchors



WolfpackRider
04-10-2013, 02:23 PM
I'm getting the upholstery on my LSV locker tops and engine cover replaced by a neighbor. I took some of the upholstery off of one of the lockers. I had a problem removing some of the screws that hold the strut support bracket to the aluminum board. The threaded tube thing that the screws anchor into had rusted a bit. I need to replace the threaded tube thing, but I don't know what it is called. From the side, it is T shaped. From the top it is circular with a hole in the middle. Also, it has 3 teeth on the edges of the circle that sink down into the aluminum board when it is tightened. Can someone tell me what to look for?

Thanks

kaneboats
04-10-2013, 02:32 PM
Why not take a minute and shoot a pic of the part and post it up here?

WolfpackRider
04-10-2013, 02:46 PM
Unfortunately, I already threw them away.

wolfeman131
04-10-2013, 02:46 PM
http://youtu.be/ZY_uGAx3rxE

brain_rinse
04-10-2013, 02:57 PM
I think you are describing tee nuts: http://www.lowes.com/Fasteners/Nuts/Standard-SAE-Tee-Nuts/_/N-1z0yk2d/pl#!

wolfeman131
04-10-2013, 03:03 PM
http://i160.photobucket.com/albums/t170/zeroziggy/45.gif

WolfpackRider
04-10-2013, 03:20 PM
I think you are describing tee nuts: http://www.lowes.com/Fasteners/Nuts/Standard-SAE-Tee-Nuts/_/N-1z0yk2d/pl#!

Those are the ones! Thanks!

brain_rinse
04-10-2013, 03:41 PM
LOL Drew!!