PDA

View Full Version : Flow Rite Elbow Size



snyderaaron
06-16-2013, 06:10 PM
My Flow rite elbow had a piece that broke off, so I bought a new one from wakemakers.

http://www.wakemakers.com/fly-high-pro-x-series-fitting-w746.html

My problem I have is that not all of the water makes it into the sac and some of it leaks. I don't know if theres a difference between the 1 inch and 1 1/8 they have listed, but it doesn't look i can order one or the other

MLA
06-16-2013, 06:59 PM
Flow-Rite only makes the 1.125" that you purchased and a .75". The 1.125" mates with the 1" Fly High W743 and the .75" Flow-Rite mates with the .75" Fly High W736. There is no mistaking these fittings as they will not cross mate. I would inspect to make sure the o-ring is still intact on male portion of the sac fitting.

snyderaaron
06-16-2013, 08:00 PM
Good call no o ring