PDA

View Full Version : ballast water strainer (gravity 3)



Jayrodau
06-25-2013, 09:19 PM
Does anyone know the size of the strainer gasket size on the Gravity 3 valve tree on my 05 LSV?
Curious if I can just buy a new gasket seal online somewhere instead of ordering the whole kit from my local moomba dealer. Thanks

moombadaze
06-25-2013, 09:30 PM
can you take the old on and go to a Ace hardware or someplace like that and match it up ?

Jayrodau
06-25-2013, 10:26 PM
My boat is 45min away in storage. Maybe someone with this Gravity 3 strainer setup could go out and measure the gasket/o-ring and post up the size. That would be awesome!

kaneboats
06-26-2013, 09:56 AM
Mine's in a box somewhere; I'll see if I can find it. You can have it if I do. I'm pretty sure you are just talking about an "O" ring though. Why not buy about 5 of them in the sizes from 3" or so to 6" or so? (I can't remember the size as I haven't looked at this thing in 2 or 3 years.) You can return the other ones later and you'll be good to go. These things are really cheap.

jsly04XLV
06-26-2013, 12:20 PM
Kane if he doesn't want the whole thing. I'll take it. Cup is cracked and leaks when filling under pressure.

From the mobile

kaneboats
06-26-2013, 02:28 PM
He's just looking for a seal. PM me your address and I'll send it to you.

jsly04XLV
06-26-2013, 03:53 PM
Sent

From the mobile