View Full Version : Audio system install
01-05-2007, 10:57 PM
Hey everyone! I am about to start my audio install in my 06 Outback V but I have a few questions first. 1st, are ony of you using an EQ and ifso were do you have oy mounted? 2nd, where did you ground your amp at. I was thinking of the tower foot on the inside of the hull but didnt know. Just throwing that out there b/c it is the closest metal to the battery area. All info would be greatly appreciated. Thanks Guys.
01-06-2007, 12:36 PM
You want to use the common ground point, or the battery's neg terminal for grounding in boats.
In a car, all the large metal is connected, and all is a common point of ground, since the entire frame/body of the car is metal. In boats - it is all fiberglass, and that is an excellent INSULATOR, not CONDUCTOR, so you can't just chose some random place with metal, it will never work.
01-06-2007, 01:30 PM
I did that last winter. Search here, on wakesiderides, and wakeworld. Some guys have posted diagrams on wakesiderides. There is a lot of good info, take a look around. Good luck.
Powered by vBulletin® Version 4.2.0 Copyright © 2015 vBulletin Solutions, Inc. All rights reserved.