PDA

View Full Version : Wake Plate



Pike
04-16-2007, 08:24 PM
This may be a dumb question but should my wake plate be moving to the "up position" after I have it completely down? This happens when I am approching full speed... :?

superman
04-16-2007, 08:31 PM
I wouldnt think so. Maybe it is low in fluid and going up when all that water pressure is hitting it under speed.
________
Yamaha DS7 (http://www.cyclechaos.com/wiki/Yamaha_DS7)

mvd
04-16-2007, 08:51 PM
This may be a dumb question but should my wake plate be moving to the "up position" after I have it completely down? This happens when I am approching full speed... :?

Don't know that but i think it is a good idea if yo swap the fuelmeter with the wakeplate meter in your dashboard. that way you alway have straight vision on your perfectpass and wakeplate.

I did that to.

Nafplio
04-16-2007, 11:40 PM
Either low in fluid or you have a leak. Mine did that and it had a leak on the fitting to one of the pistons. Check your bilge for tranny fluid.

Jon
04-17-2007, 12:57 AM
Check for leaks first. If no leaks, your pump is not working right. There is a "plunger" type piece in the pump that might not be sealing right.