PDA

View Full Version : Where to locate ballast pump



rosh
05-31-2007, 10:01 PM
Hi

Im going to install a Jabsco Reversible pump on my Mobius DD and the Jabsco pump is not sumersible so I will like to know where do you think it will be the best location for the pump and valves, I guess that some one has done something like this and I will apreciate a lot if you can help me out.

Thanks

Buttafewcoe
06-01-2007, 08:32 AM
Usually there shouldn't be anymore than a couple inches of water in the bilge, so I would think an inch or so above the bilge pump should be satisfactory. You have to remember, @ wakebording speeds the bow is up which means any standing water down there runs to the stern.
.
Hope this helps,
.
B