PDA

View Full Version : Finished stereo pics



rbc_racing
06-21-2007, 10:09 PM
I finally finished my stereo install on my 07 LSV, the specs are -skylon rubicon 450's on the tower powered by a phoenix gold xenon x200.2 with a line level volume control to make the tower speaker volume adjustable, sub is a 10" kicker solobaric L7 powered by a phoenix gold xenon x600.1, cabin speakers are stock kenwood 6.5's powered by an alpine v-power F250 4-channel amp. Power is supplied by 2 blue top optimas on a perko switch under the rear seat.

http://i92.photobucket.com/albums/l38/rbc_racing/LakeLanier5-10-07002.jpg
http://i92.photobucket.com/albums/l38/rbc_racing/BOAT094.jpg
http://i92.photobucket.com/albums/l38/rbc_racing/BOAT103.jpg
http://i92.photobucket.com/albums/l38/rbc_racing/BOAT106.jpg
http://i92.photobucket.com/albums/l38/rbc_racing/BOAT105.jpg

Burke
06-22-2007, 11:23 AM
Nice work. How does it sound? Your dual Optima's mounted like that have inspired me to pick up another Optima and remount them. Very smooth looking.

gotmyboat
06-22-2007, 03:18 PM
Very clean install!! I like to see that attention to detail. I am still running stock sound, but have been toying with the idea of upgrading. I currently have to remove my tower to fit boat in the garage, so I don't want to add weight to the tower. I am on a waiting list for a 12'x25' storage unit with a 14' door ($165/mo). It is two blocks away from my house. Once I get in there I can leave the tower up and add some cans, amp, etc. At that point I'll be reading old threads and asking you all for advice.

Again, great work!!!

Dave

ATLOUTBACKV
06-23-2007, 12:03 AM
how did you mount your amp racks to the hull????

rbc_racing
06-23-2007, 11:16 AM
The system sounds great, I do need to vent storage compartment out into the boat to let the bass out, I think I'm going to use a billet vent along the floor, the fiberglass and the seat cushions are very effective at not allowing the sound to get out. I mounted the amp racks by attaching a piece of king starboard to the back of the rack and then I removed a cpl of screws from the rubrail, installed longer screws and tightened the rack down. The weight keeps the amp rack in place the screws just keep it from moving. ATLOUTBACK if you need a similiar setup done give me a call I have a few different components left from my last system in my old mobius and I can set your system up pretty quickly.