View Full Version : If you have the Gravity 3 Ballast look here please
10-22-2007, 06:14 PM
I just got mine about a week ago. Upgrading from 1 bag. Got all the wiring done.I just need to know where the drain pumps mount for the rear bags. Also if anyone has any tips on cutting the hole for the switches that would help also
10-23-2007, 12:14 AM
44 views and not one person responds i guess everyone has the single bag setup :roll:
I have that set up but it was installed in the factory. All i know is the rear bags drain out the side of the boat...lol i have no idea what im talking about as far as what to do sorry
10-23-2007, 09:33 AM
same here bro...this was one thing i was willing to pay for to get done. call your dealer and talk to them.
10-23-2007, 11:45 AM
Yep, I press a button and the Ballast Fairies fill the tanks, then they empty them when I'm done. Magic.
10-23-2007, 07:30 PM
The pumps are all the way to the back of the boat. You'll need to take the divider panel off. Where mine are:
The pumps discharge between the engine and the cabin:
The intake manifold is on top of the tranny:
Hope this helps. Shouldn't be too hard to put together.
10-23-2007, 07:59 PM
Thanks so much.Do you leave the divider panels out of do you just notch out where the tubing runs under it?
10-24-2007, 11:48 AM
No problem. The panels are notched and stay installed during the season. I removed them to winterize.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.