View Full Version : FOR SALE: 2007 Mobius LSV-Loaded in Atlanta
01-06-2008, 09:48 PM
I'm going through a job change so I think I'm going to let my baby go. It's a 2007 Mobius LSV custom ordered to my specs at Atlanta Marine, It has 89.8 hrs, it has a gelcoat upgrade so the hull and the side are the same color, it has gravity 3-3 bag ballast, stainless package, heater, perfect pass, wakeplate, snap on cover, bimini top, depth sounder, wakeboard racks, matching single axle trailer with folding tongue, custom stereo-10" kicker Solobaric L7, Skylon Rubicon 450 tower speakers, Pheonix Gold Amps, Apline amp running all the cabin speakers, dual optima blue top batteries running through a perko switch, factory kenwood CD player with modified Ipod hookup(you can control the Ipod independently of the radio). Recent 100hr service, very well maintained, warranty is transferable.
01-18-2008, 03:19 PM
Forgot to include that it has the upgraded acme wakeboarding prop with the factory prop as a backup, also has the supra under driver seat storage drawer
01-31-2008, 03:25 PM
Sent you an email
02-03-2008, 11:50 AM
02-08-2008, 08:06 PM
Here are a few interior pics
02-18-2008, 05:54 PM
will you take 35?
02-18-2008, 05:55 PM
will you take 35?
02-18-2008, 08:20 PM
I'm asking payoff and thats the least I will be able to take.
02-21-2008, 09:14 PM
I'll remove the stereo upgrades and drop the price to 38,500 8)
04-27-2008, 11:53 AM
04-28-2008, 02:07 AM
RBC I'm getting ready to build some amp racks exactly like yours. You have any more pics of the install. and how did you attach them. I see the holes on top to screw into the hull backing but how did you attach to the bottom? Sorry for the hijack Thanks
Nice boat should make someone really happy!
04-28-2008, 11:55 AM
Sweet boat - if I was closer I'd look into it!
I'll jump in on this hijack!
Check out this link (http://www.moomba.com/msgboard/viewtopic.php?t=4405&postdays=0&postorder=asc&start=10) for details on my amp racks - very similar to what he has done. I epoxied blocks to the hull. At first, these blocks contained mounting posts (as pictured). I later removed the posts and just use screws through the amp rack once it's in place.
Good luck with the boat sale!
04-28-2008, 10:01 PM
To mount My amp racks I went with what atlanta marine suggested. I used a piece of king starboard(the plastic "wood" the boat is built out of) and attached that to the back of the amp rack. I then simply removed a cpl of the stainless rubrail screws and replaced them with screws that were 1/2 inch longer. You could already see the screws from the inside of the boat and the way they build the boats they end up having 1 screw every inch and a half under the rub rail anyway. So in the end the screw through the rubrail secure the amp rack and I used a small 90 degree bracket on the bottom but the weight alone is enough to keep them in place. I ran the setup all last year with zero problems.
04-28-2008, 10:36 PM
Great ideas! thanks Burke and RBC. Burke that was what I was planning on doing with mine but I saw the way rbc had his set up and was curious how he attatched them w/o glueing them. rbc I did the same thing in an insall for one of my buddies, with the angle at the bottom. Works great!
I can't wait to finish mine! Is been 3 weeks now waiting on SC for carpet :? Hope to get it done soon.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.