View Full Version : stress cracks
10-27-2003, 07:54 PM
My hull has cracks in the hull from the swim platform brackets. Due to stress. I want to fix it myself. Does any one have any input.
10-28-2003, 06:58 AM
Same thing happened to my boat. I would not recommend fixing it yourself. The glass shop I took mine too cut a 1 foot by 1 foot section out around the bracket and they glassed in a 1 foot by 1 foot piece of aluminum and finished it off with some matching gel-coat. Looks great and it has not come back (two seasons 250hours)
10-28-2003, 10:11 AM
If you don't mind, what did they charge you for this? Also, what's the downside to leaving it alone?
10-28-2003, 12:31 PM
I caught it in time, very thankfully it was covered under warranty. It was around $2,500 but well worth it. If it is like mine was I think long term, eventually the brackets would have worked their way loose, maybe fall off and you would have a rather large hole in your boat (worst case).
If you grabbed the platfrom and lifted a little you could see movement in the transome fiberglass where the swimplatform brackets were mounted. I would not take this lightly it is problem that needs to be fixed.
10-28-2003, 05:22 PM
is there a way to get behind the platform brackets with a plate for support?
10-29-2003, 07:11 AM
Yes, you have to take the trunk apart. I have a 2001 Mobius Pro. What boat are you talking about?
10-29-2003, 05:55 PM
We have a 2001 Kamberra walkthru. It looks like I have to raise the platform about 2 - 3 inches. Top lug screw just pierces the top of the stringer? I was going to have the the platform hanger enlarged with a backing plate to use some thru bolts. The platform could be too long or the hanger-bracket setup angled wrong. The walkthru looks tough to get a backing plate in there.
10-29-2003, 06:46 PM
If you haven't done it already, you might do a search on this board. This issue has come up before with the kamberras.
10-29-2003, 11:36 PM
Just curious, shouldn't this be covered by the hull warranty?
10-30-2003, 09:18 AM
Is this a common problem on Moombas? Brian Raymond, has anything been done to prevent this on recent model boats?
10-31-2003, 04:56 PM
Just had my 2000 Mobius V fixed. They hade to cut holes in the floor to get to the brackets and reglass the floor when done. $3900 repair bill but the swim platform is solid as hell now.
Powered by vBulletin® Version 4.2.0 Copyright © 2013 vBulletin Solutions, Inc. All rights reserved.