PDA

View Full Version : Guide Pole Pads



dtlaine
10-21-2008, 11:10 PM
Has anybody found a good source for guide pole pads? I don't really need anything fancy and printed, just something to protect the boat. I see Overtons has some, but I'm not sure if the poles are 2" or 2 3/8" (the two sizes they offer). My trailer is in storage. Anybody happen to know the diameter of the poles on our boats?

Thanks in advance.

04OUTBACK
10-21-2008, 11:40 PM
DT
Check here:
http://cgi.ebay.com/ebaymotors/Wakeboard-Ski-Boat-Trailer-Guide-Pads-Brand-New-36_W0QQcmdZViewItemQQ_trkparmsZ72Q3a1205Q7c39Q3a1Q 7c66Q3a2Q7c65Q3a12Q7c240Q3a1318QQ_trksidZp3286Q2ec 0Q2em14QQhashZitem120321909123QQitemZ120321909123

I bought some from them for my previous boat.. they say their pads fit 2-2 1/2"...
Look at their ebay store for options.. their reg. website is screaminsacs.com

I was pleased with the ones I got from them.. I may get some more to replace my factory Moomba pads... they are fading and have a little wear from the fence where I park (TIGHT FIT!)

BW

dtlaine
10-21-2008, 11:44 PM
Awesome. Thank you.

wolfeman131
10-22-2008, 12:50 AM
DT,

Atlanta Marine replaces the stock Moomba pads with ones that say Atlanta Marine and have the stock ones in a box in the parts dept. I don't know what they cost, but if you want ones that say Moomba, let me know and I'll pick them up for you when I take the boat in for winterization :( in the next 2-3 weeks.

jmvotto
10-22-2008, 08:13 AM
my 07 OBV trailer single axle has 2" poles about 30". i called boatmate yesterday so i could replace the plastic liner. they are cheap, and brittle I want to get some stronger stuff like black abs or pvc and HD/lowes so it is stronger. I snapped one putting the boat on the trailer sunday. Trailer too deep and canal current much too strong due to lowering the lake level.

dtlaine
10-22-2008, 11:32 PM
DT,

Atlanta Marine replaces the stock Moomba pads with ones that say Atlanta Marine and have the stock ones in a box in the parts dept. I don't know what they cost, but if you want ones that say Moomba, let me know and I'll pick them up for you when I take the boat in for winterization :( in the next 2-3 weeks.

Thanks for the offer. I ordered the set of eBay that 04 suggested.

kaneboats
09-30-2013, 04:20 PM
Anybody have a good source for these? I duct taped mine up before our July trip but the covers are torn too. Need to replace them both. I don't care what they say on them (other than maybe MC).

wolfeman131
09-30-2013, 04:30 PM
Cynde @ Atlanta Marine

bergermaister
09-30-2013, 07:31 PM
Anybody have a good source for these? I duct taped mine up before our July trip but the covers are torn too. Need to replace them both. I don't care what they say on them (other than maybe MC).

Just pads or inner plastic too?

kaneboats
09-30-2013, 07:35 PM
The plastic parts are fine. Just the pads, ma'am. And covers.

rdlangston13
09-30-2013, 07:36 PM
The dealer should just give you some, it's basically free advertising for them


Sent from my iPhone

bergermaister
09-30-2013, 07:39 PM
Right..... Let me know how that one works out for ya.

kaneboats
09-30-2013, 07:40 PM
I don't have a dealer. He was in Orlando but shut down a couple of years ago. What ever dealer gives me a new set of those pads is going to get my next boat order though.

KG's Supra24
09-30-2013, 08:00 PM
The dealer should just give you some, it's basically free advertising for them


Sent from my iPhone

That didn't fly here, lol

Sent from my DROID RAZR using Tapatalk 2

rdlangston13
09-30-2013, 08:09 PM
Right..... Let me know how that one works out for ya.

My dealer hooked me up


Sent from my iPhone

jpetty3023
09-30-2013, 09:17 PM
I tried to get a free pair of free advertising to and they looked at me like I had a third eye on my big forehead


Sent from my iP5s on an app called tapatalk 2

jmvotto
09-30-2013, 10:01 PM
50 bucks on ebay for Moomba ones.
29 cheap ones on overtons.
25 on ebay for just skins no foam pad.

tater
10-01-2013, 09:14 AM
56 bucks for Moomba ones on there website.

996scott
10-01-2013, 12:21 PM
these are pretty cheep.

http://www.ebay.com/itm/36-Boat-Trailer-Guide-Pole-Pad-Cover-Heavy-Duty-Canvas-/121175819022?pt=LH_DefaultDomain_0&hash=item1c36a4430e

bergermaister
10-01-2013, 05:05 PM
That's what i currently have - got 2 seasons out of them before they started falling apart. My rub rails literally cut the foam in half underneath the covers. Stitching on the covers is also starting to go. Next spring I'll probably "spring" for a heavier duty set. ;)

kaneboats
10-01-2013, 05:09 PM
Tempted to make my own with my own logo on them.

18598

bergermaister
10-01-2013, 05:15 PM
Find some pipe insulation of the correct inner diameter and it wouldn't be too hard... I found some really heavy duty stuff that I used to cover some overhead support poles for collision protection and IIRC 12ft was about $16 shipped. Pretty cheap. Thought about just resewing mine and looking into the padding again.

KG's Supra24
10-01-2013, 05:30 PM
This is how group buys start.

Sounds like someone should contact Cynde at Atlanta Marine.

996scott
10-02-2013, 12:01 AM
i would be in for a set on a group buy.

Riding23
10-02-2013, 12:18 AM
I would definitely be in for a group buy

moombadaze
10-02-2013, 12:31 PM
Tempted to make my own with my own logo on them.

18598

go for it.