PDA

View Full Version : Battery Isolator



1LOKMOOMBA
02-09-2009, 07:10 PM
I will be installing a battery isolation relay, for auxillary battery. Any input?

Razzman
02-09-2009, 07:46 PM
Definately go with the Blue Seas 7610 ACR setup. It does not have the issues of a regular iso and has full circuit protection. I installed the 7650 Which includes their batt switch after using regular Iso's on all my previous boats and it's basically worry free.

Blue Sea 7610 ACR (http://bluesea.com/category/2/productline/overview/387)

1LOKMOOMBA
02-09-2009, 08:31 PM
Definately go with the Blue Seas 7610 ACR setup. It does not have the issues of a regular iso and has full circuit protection. I installed the 7650 Which includes their batt switch after using regular Iso's on all my previous boats and it's basically worry free.

Blue Sea 7610 ACR (http://bluesea.com/category/2/productline/overview/387)

Thanks for info. What problems did you have with reg isolation relay

Razzman
02-09-2009, 08:53 PM
First off they can burn up without warning, not disconnect, most std iso have a slight drain at all times as well.

Here's the Blue Sea 7650 on mine:

http://www.moomba.com/msgboard/attachment.php?attachmentid=1452&d=1222231503

tazz3069
02-09-2009, 08:57 PM
Razz,
How will that work with dual batteries? Will I need two of them?

Razzman
02-09-2009, 09:13 PM
Here's the docs that show the install instructions.

The Switch: 5511e Switch (http://bluesea.com/files/resources/instructions/5511e_web_version.pdf)

The ACR: 7610 ACR (http://bluesea.com/files/resources/instructions/990170140.pdf)

zabooda
02-11-2009, 03:17 PM
Excellent install Razz.