PDA

View Full Version : mobius LSV ballast pump electric valve



Kent and Carol
02-18-2004, 02:50 AM
Brian, if you are out there could you tell me what is the brand(and model # if avaliable) of the electric ballast valves used in the 04 mobius lsv bertha 3 bag ballast system.
I need to fix one and it is not pratical to go back to the dealer for a $20 repair(I hope)
Thanks, kcjczrs@yahoo.com

dmgx
02-18-2004, 03:08 PM
Brian Raymond is at Indmar school this week. I'm sure you're wondering why he needs to go to school since he was practically born and raised in a boat :). Anyway the only way you can get the electric valves is to order them through your local dealer. They could have it dropped ship to you and save you the drive.

Regards,

Jay Warren
Mkt Manager

Kent and Carol
03-08-2004, 12:47 PM
Brian, this is a repost from a couple weeks ago; if you could answer this question, it seems that Jay Warren was answering you e-mail and did not want to answer the question

Brian, if you are out there could you tell me what is the brand(and model # if avaliable) of the electric ballast valves used in the 04 mobius lsv bertha 3 bag ballast system.
I need to fix one and it is not pratical to go back to the dealer for a $20 repair(I hope)
Thanks, kcjczrs@yahoo.com

Brian Raymond
03-10-2004, 10:44 PM
K-N-C, I apologize for the delayed response. What exactly are the symptoms that you are having? (A)Bag fills when system off and driving.(B)Bag fills to slow.(C)When turned on, pump runs but solenoid doesn't click.(D)Solenoid clicks, but pump doesn't run.(D)No power to switch(lights in switch cover do not illuminate when on fill or drain). Did this issue occur slowly, or everything was fine last time out? Please varify batt. voltage and ground at the affected solenoid and pump. Check the ballast fuse panel under the dash and make sure there are no blown fuses or loose connections. Please keep me posted. Brian Raymond