PDA

View Full Version : Needed a good rack in the bed.



McMoomba
04-04-2009, 09:56 PM
To windy to go out today so I decided to do a project.

Needed to get this into the truck.
http://moomba.com/msgboard/picture.php?albumid=148&pictureid=1155
So I made this
http://moomba.com/msgboard/picture.php?albumid=148&pictureid=1153
This is the back, I put a 4 nuts to act as guides on bedliner
http://moomba.com/msgboard/picture.php?albumid=148&pictureid=1152
Ready tp load
http://moomba.com/msgboard/picture.php?albumid=148&pictureid=1154

McMoomba
04-04-2009, 09:57 PM
All loaded

http://moomba.com/msgboard/picture.php?albumid=148&pictureid=1149
http://moomba.com/msgboard/picture.php?albumid=148&pictureid=1148
http://moomba.com/msgboard/picture.php?albumid=148&pictureid=1150
http://moomba.com/msgboard/picture.php?albumid=148&pictureid=1151

McMoomba
04-04-2009, 10:02 PM
Safe and sound
http://moomba.com/msgboard/picture.php?albumid=148&pictureid=1147
Materials:
1 - 2 x 4 x 8' cut in half
20' - 3/4" PVC Cut into 1' sections
2 pair jersey gloves (cut off fingers to pad pvc)
1 - 3/4 x 12" x 5'
small piece of marine carpet

moombadaze
04-05-2009, 08:25 AM
very nice-still have room for a cooler?

Limishowman3
04-05-2009, 02:11 PM
Hey do you like them slingshot bindings on the ibex? I have that pair, I like except for 3 different pull chords. I tried intergrated on one shoe making it one pull chord on top but i had to tie the two chords together. I cant tighten it up as much or loosen it up as much b/c of location of the knot. Although its a pain in the ass trying to run the chord through the clip and tightener. Have you done any mods? Also how do you like them bindings?

McMoomba
04-05-2009, 02:44 PM
Hey do you like them slingshot bindings on the ibex? I have that pair, I like except for 3 different pull chords. I tried intergrated on one shoe making it one pull chord on top but i had to tie the two chords together. I cant tighten it up as much or loosen it up as much b/c of location of the knot. Although its a pain in the ass trying to run the chord through the clip and tightener. Have you done any mods? Also how do you like them bindings?

They are Gator Gonzalez binding, I haven't been able to use yet but they are extremely confortable dry and I think I paid $50 or $60 shipped. I can't wait to try the whole setup.

http://www.gatorboards.com/tools/resources/a602aa296153d22ea54a365598b07ae1/upload_images/d_7984d83c7bfc5786e63121f9ea64c231.jpg

Limishowman3
04-05-2009, 04:36 PM
Man they almost look exactly the same as mine w/ black outside and red tongue.

jmvotto
04-05-2009, 10:42 PM
That looks awesome in the truck, now for the encore, lets see them on the boat.... LOL Nice job for the hauler

My wife has the same ronix.

Kidder
04-05-2009, 11:58 PM
I can't view the images. Not sure why. I checked cookies and blocking filters and everything is accepted for this site.

McMoomba
04-06-2009, 08:19 AM
All of the pictures are in an album under my profile

Sled491
04-06-2009, 08:18 PM
Hey McM, can see it all, looks great. And I agree, man lets see how it all fits in the boat!

McMoomba
04-06-2009, 09:00 PM
That is a great idea if the wind would ever stop blowing 20-30mph, I might have to take up kite surfing.
I need to add 2 pair of racks to the boat, but for now the 3 larger boards and the wakesurfer go on the existing racks and the two little boards go in the rear compartment. I am running out of time and money for projects. I just added 2 400lb sacs to the rear (will post soon) and ordered kicker 700.5 amp. Really I just want to get on the water.

Sled491
04-06-2009, 09:03 PM
Amen to that brother, I've been trying to get out that last 3 weeks, and every time it keeps snowing!!

SoTX
04-07-2009, 01:41 PM
"I need a good rack in the bed"

Yep thats what I alway say ;)

jmvotto
04-08-2009, 10:28 PM
lmao:p

thats funny stuff