PDA

View Full Version : Ballast pump.



Eric Z
05-12-2009, 10:48 AM
Does anyone know what the part number to the empty pump is? How much is it and where should I get one.....How had is it to replace?

jasonwm
05-14-2009, 03:00 AM
Moomba uses rule 800GPH pumps for draining prior to 2009. Any 800GPH Aerator style pump with 3/4" NPT threads will do the job. Installation is around 15 minutes. Feel free to contact me if you need help sourcing one.

Chefwong
05-14-2009, 09:39 AM
I'm currently having issues with my center empty pump. The replacement for it is a 700gph rule 203fc. However they don't seem to make that pump anymore, it has been replaced with the 403 which I don't know whether or not it is the same exact size.

(http://www.cgedwards.com/Rule/rule03.html)

jasonwm
05-14-2009, 02:45 PM
I would probably not recommend using the 403 replacement for this application. It is designed for a livewell, in which case flow rate is not of huge concern. Finding a pump with a straight intake would be a better choice and will result in faster draining.

etang789
05-19-2009, 04:14 AM
I'm currently having issues with my center empty pump. The replacement for it is a 700gph rule 203fc. However they don't seem to make that pump anymore, it has been replaced with the 403 which I don't know whether or not it is the same exact size.

(http://www.cgedwards.com/Rule/rule03.html)

Yes I cannot find 203FC anywhere! So is the 403FC the updated version?

jasonwm
05-21-2009, 04:11 AM
See my post above, I would go with Attwood's Tsunami T800 over the 403C.