PDA

View Full Version : Mobius LSV Upgrades - Bling?



bjames
10-13-2009, 07:23 PM
Does anyone know a good resource for finding upgrades (Useless Bling) for items such as;

1. Step Pad for top of Gunwale (simialr to Supras)
2. Stainless exhaust covers
3. Stainless transom vents
4. Stainless rub rail for swim platform (similar to supra)
5. Cool trailer rims:)

These are some of my ideas to keep me busy throughout the winter hibernation.

you da man
10-13-2009, 07:32 PM
I'd be down for most of those upgrades.

cab13367
10-13-2009, 11:49 PM
Does anyone know a good resource for finding upgrades (Useless Bling) for items such as;

1. Step Pad for top of Gunwale (simialr to Supras)
2. Stainless exhaust covers
3. Stainless transom vents
4. Stainless rub rail for swim platform (similar to supra)
5. Cool trailer rims:)

These are some of my ideas to keep me busy throughout the winter hibernation.

Check out:

http://www.danamarineproducts.com/ProductGroups.cfm?CFID=710303&CFTOKEN=5c99e04-3368e689-e12e-4a8e-a3ba-fefe96fad134

Start with billet hardware. Lots of goodies there. Even an aluminum bezel for the Kenwood remote in your choice of 25 colors ...

Newty did #4. He got the handrail from the dealer.

sandm
10-14-2009, 12:00 AM
did #1 for my supra. bought them for $50 from the dealer. they had them laying around and didn't know what to do with them..

I like the exhaust as well, but think the wakeplate would get in the way.
all the other stainless parts can be had from dealer.
probably spendy, but worth a shot...

newty
10-14-2009, 12:04 AM
Here you go! I love mine.
I love the gunwale step idea. I may have to do that.

tprkolbas
10-14-2009, 12:09 AM
i have the step pads for the rails - got them thru my dealer for $40 + installation which added up to under $100. they are plain jain ones, but do the trick. they did have ones that said moomba on them, but they ran something like $120 a pair + installation.

kaneboats
10-14-2009, 01:01 PM
Maxpower has some nice rims on his trailer. Might want to look for his posts.

brain_rinse
10-14-2009, 01:54 PM
i have the step pads for the rails - got them thru my dealer for $40 + installation which added up to under $100. they are plain jain ones, but do the trick. they did have ones that said moomba on them, but they ran something like $120 a pair + installation.
Do you have any pictures? Where is your dealer? I'd like to see the Moomba ones too.

Bcoutsfly
10-14-2009, 03:03 PM
Here you go! I love mine.
I love the gunwale step idea. I may have to do that.

How much did you pay for the rails? Did you get that from the dealer?

squeeg333
10-14-2009, 03:22 PM
Does anyone know where to get good deals on the Stainless thru-hull fittings? I really like that looks, but have been blown away by how much they want for them!

you da man
10-14-2009, 03:44 PM
Does anyone know where to get good deals on the Stainless thru-hull fittings? I really like that looks, but have been blown away by how much they want for them!

Stainless exhaust fittings would be niiiiiiice.

yearround
10-14-2009, 03:52 PM
i used gator grip for my gunwale pads. i replaced the swim deck with it, then used left overs. the pad goes from the tower to the back, in 3 pieces. had several comments from supra guys and others at marina about them

newty
10-14-2009, 04:23 PM
Heres where I got my Stainless through hull fittings. Good quality stuff!
http://cgi.ebay.com/ebaymotors/Set-3-Stainless-Boat-Thru-Hull-Fittings-3-4-Fitting_W0QQcmdZViewItemQQhashZitem1c0cdab885QQite mZ120474744965QQptZBoatQ5fPartsQ5fAccessoriesQ5fGe ar
As far as the rail goes I think they are around $150 but I don't remeber specifically. you would have to ask your dealer.

bjames
10-14-2009, 05:44 PM
Heres where I got my Stainless through hull fittings. Good quality stuff!
http://cgi.ebay.com/ebaymotors/Set-3-Stainless-Boat-Thru-Hull-Fittings-3-4-Fitting_W0QQcmdZViewItemQQhashZitem1c0cdab885QQite mZ120474744965QQptZBoatQ5fPartsQ5fAccessoriesQ5fGe ar
As far as the rail goes I think they are around $150 but I don't remeber specifically. you would have to ask your dealer.


Hi Newty,

Are the swim platform rails from '07 Supra or were those a moomba part? Also how good of fit were they in terms of curvature. Did you install yourself?

squeeg333
10-14-2009, 07:44 PM
Newty, thanks for the heads-up on the ebay auction for the stainless thru hull fittings. Best price by far, especially since it's for 3 of them!!
I should do that integrated bow sack mod like you did (with additional empty pump), then I'll only have 1 extra fitting left after buying two sets of these!

brain_rinse
10-14-2009, 11:42 PM
I'd like any ideas on something for in between the cabin speakers. Supras have a nice billet badge there, as do a lot of other boats. It just looks a little plain... suggestions?

newty
10-15-2009, 10:21 AM
Bjames, I'm not sure. I know its a supra part prolly 08 and older, but all the skiers choice platforms are the same so it should fit on any newer platform. As far as mounting is was simple.

squeeg333 the sack works really well. I did have to put a spring check on the discharge of the floor sack to build enough back pressure to fill the ibs. Once the two sacs are filled it overflows out of the ibs discharge. The factory discharge pump has enough juice to push water through the check to empty the bag.
If you have any questions on how I did it let me know.

bjames
10-15-2009, 02:10 PM
I'd like any ideas on something for in between the cabin speakers. Supras have a nice billet badge there, as do a lot of other boats. It just looks a little plain... suggestions?


I saw a photo somewhere where the badges between the speakers were lit up, probably to act as LED courtesty lighting. It looked real nice. If you find an aftermarket LEG badge, please post any info you get.

squeeg333
02-16-2010, 02:54 PM
Newty, are the thru hull fittings 3/4"? My boat is in storage a long ways away, but I am wanting to order myself some SS thru hull fittings. Let me know when you can!

newty
02-16-2010, 03:33 PM
Yep they're 3/4. Super easy upgrade.

brain_rinse
03-03-2010, 05:03 PM
I'd still like to see pics of some of these upgrades if anyone has done them.

Sled491
03-04-2010, 11:07 PM
Did the through hull fittings with Newty last year, should be able to find pics in my albums. Love that site that Cab put up there, I could do some serious damage to my bank account with those guys :)

newty
03-04-2010, 11:14 PM
Yea me too!:D

mmandley
03-04-2010, 11:44 PM
What site was it he linked?

newty
03-05-2010, 01:22 AM
http://cgi.ebay.com/ebaymotors/Set-3...ssoriesQ5fGear
The place we got the stainless through hull fittings.

byronkoz
03-05-2010, 01:51 PM
http://cgi.ebay.com/ebaymotors/Set-3...ssoriesQ5fGear
The place we got the stainless through hull fittings.

Site is no longer available. Got a name or other link for them?

gus 08 mobius lsv
03-05-2010, 01:56 PM
google search half price marine that is where i ordered my ss hull fitting thru

byronkoz
03-05-2010, 02:02 PM
Awsome thanks. Bought the set of three. Heres the link.

http://stores.ebay.com/halfpricemarine__W0QQ_sacatZhalfpricemarineQQ_sidZ 168996710?_nkw=thru+hull&submit=Search

gus 08 mobius lsv
03-05-2010, 02:05 PM
yeah i needed 4 for my lsv and he shipped me a 4th one so they work with ya very well there too

Sled491
03-05-2010, 10:40 PM
What site was it he linked?

this one
http://www.danamarineproducts.com/Pr...a-fefe96fad134