PDA

View Full Version : Stock Ballast



squeeg333
10-20-2009, 11:55 PM
I've got a really dumb question. I bought an '08 LSV used, and I am curoius what size of ballast tanks I've got. Is there a way to tell? I assume they are stock, but who knows. There's no real identification numbers to say their quantity on them. There are three ports on all the tanks - Fill, Drain, and a capped port on the opposite end. Any thoughts?

Razzman
10-21-2009, 01:00 AM
Assuming everything is stock and your referring to the bags then they are 400lbs.

cab13367
10-21-2009, 02:27 AM
I've got a really dumb question. I bought an '08 LSV used, and I am curoius what size of ballast tanks I've got. Is there a way to tell? I assume they are stock, but who knows. There's no real identification numbers to say their quantity on them. There are three ports on all the tanks - Fill, Drain, and a capped port on the opposite end. Any thoughts?

The center bag should be a 10x16x70, 400#. In '08. I believe the same bag was put in each rear locker.

Some fat sacs have some numbers on the end as shown below. The last 6 digits is the size in inches (101670=10"x16"x70").

Hope that helps.

http://i250.photobucket.com/albums/gg276/cab13367/004.jpg

squeeg333
10-21-2009, 03:48 PM
Thanks guys. I am 99% sure they are stock bags, but was curious if there were any identification marks that might tell me. No worries are all though!