If you mind take a few pics. I'm a little nervous about drilling a a hole without taking the floor you and move the tank. Buy if you font have any trouble that would be way quicker. Good luck with it tho
o8LSV i found this at bas pro for 10 dollars and would work perfect for out situation.place the head inline with the track fins and if you forget the plug it will help by having a teflon ball that stops water from flowing into the boat. The ball is held into place by a taper on the top and a stainless rod on the other so there's no way to loos it
Thanks. I don't think it will work though I could not find the measurements for the height. There is on about 1inch max between the hull and gas tank... I am planning to drill the hole this weekend, so then I can measure from the bottom and see how much room is there. I'll let you know when I get the measurements. Thanks again.
I really would like to install a drain in my 05 LSV. It has the recess between the fins on the keel, but I'm concerned about drilling from the bottom with the gas tank in place. I bought the proper drain plug and mount, and plan on removing/installing it from below to help dry/clean it out the bilge prior to storage.
Has anyone done it from the bottom without tank removal?