so the front facade is sitting 7 inches off the floor. got it.
got any pics of the back of that custom enclosure.
Did you go all the way back to the battery for the power to the amps or did you go through the switch so you can select which battery the stereo gets run on?
The factory switch is not capable of switching between battery 1, 2, and off. I ran the power directly to battery 2.
Is the bed liner working good? How many coats are you up too? Is it the roll-on or the spray?
Sent from my iPhone using Tapatalk
This will be the first box I've done with just bedliner, so I'm not sure. It is the spray kind, and I've used 4 cans. The boat has ~35 hours on it and so far there has been absolutely no moisture in that area, so I'd imagine combined with the fact that its so far off the ground it won't be an issue.
Ian - 4 cans is plenty. The big help here is that you have elevated the base from the floor. This will eliminate moisture build up. In fact in my experience it doesn't need to be lifted up 7". Even 2-3" will improve moisture reduction. I would suggest to use birch plywood for the enclosure versus MDF as MDF tends to be like a sponge.
7 is just where it ended up fitting the best around the wires through the floor and around the air box thing. Birch looks so nice too, one day maybe I'll stain a wood box instead of hiding it, lol.