I saw Harmsway's post about some custom switch covers that looked awesome by the guys at OTRATTW.
- Are my switches below the right ones? Sorry for the poor cell phone pic!
- If so, any suggestions on the PerfectPass switch?
- And do I just yank the covers off? or what is the correct way to remove the switch cover?
Thanks for any help, Eric.
Yes, it looks like your switches are the right ones. I think, though, that otrattw only etches black switches, so your new switches would be black.
On the Perfectpass switch maybe the switch for "cruise"? I'll try to find one in a bit.
The covers pop off if you work them carefully with a small slotted screwdriver. If you want to wait, though, otrattw sends you a special little plastic removal tool.
There's also this thread for more discussion on this...
OK, here is a cruise control icon, in this document, page 38, top left. You can have them put that icon and the words "PERFECT PASS" if you want.
Dhyams, thanks. I was just posting these better pics when I saw your responses!!
Originally Posted by dhyams
Thanks again, Eric.
Attachment 16508Attachment 16507
Good deal...note that otrattw's switches will also not have the red lenses. See this thread for pics of what they will look like:
In case it will help you out, this is exactly what I sent to otrattw (formatting is a little messed up, but you get the gist):
I'd like to order these, all Contoura V rocker switch covers, no indicator bars except as noted.
WORD IMAGE NOTES
AMP speaker icon from here: http://www.otrattw.com/proddetail.php?prod=VVPZC2G-500
LIGHTS AC indicator bar on top and bottom
ACC A5 indicator bar on top and bottom
I got the picture codes from this document: http://www.carlingtech.com/sites/def...s-Markings.pdf