Stock Amp Rack
I ordered my new LSV with just the standard stereo and 4 in boat speakers, and I was told that the boat would not come with the amp rack. I ordered the onboard charger, which is usually mounted to the amp rack. Does anyone know if the amp rack will now be included?
Not getting the stock amp rack could be a good thing. One particular tow boat manufacturer pre-cuts 3 large squares out where the amps will go, before wrapping the carpet over the board. The was is useless if your plan is to do anything other than the 3 OEM amps in the OEM arrangement. One other only cuts the rack to fit the 2 OEM options. SO again, its no use if you are doing more than 2 or larger amps then the factory offerings. Building your own allows you to lay out the components like you want.
Ive collected 3 of them, in which we cut up and use the HDPE for fabrication on other projects.
I can't speak for sure, but the Mojo when we got it was ordered as a Stock stereo with Bow Speaker option and charger. It had an amp rack, they mounted the charger, amp, circuit breaker and ground block to it.
Originally Posted by jstenger
I had to take it out because it was too small.
Slightly different now.
If for some reason you dont get a rack, and want one I kept my factory one and we can talk about measurements and see if it will fit.
think my amp board looked like Mikes in the above photo, I ordered the bow speakers