Search:

I have a 07 LSV and run the exact same setup as brain_rinse.

It sounds to me like you need a little more weight in the bow. try moving all your passengers up there next time and see if the wake...

My 6yr old just started wakeboarding a couple of weeks ago.. she got up first pull and can now cross the wakes and survive turns and rollers.

Where can I find the red ID lights that go under the boat facing toward the back? the light and rubber grommet managed to fall out on the way home from the lake. I havn't been able to find the...

I've got some Polk cabin speakers under the tree and am planing to install the new OJ wakeboard prop. 14.25 X 14.5 LC 1 1/8" FUSION 4-blade. Oh.. and it really needs a good cleaning.

What is the tolerance on the shaft alignment where it enters the strut. On the V-drive side of the strut, my shaft is slightly off center.. I'd say the bushing on the starboard side is about half...

Ive been thinking about this same mod.. post up what you end up doing.

David.. thanks for the info.. I didnt think the remotes were causing the noise. i was just curious why they stopped working when i re-routed the power and ground going to the head. I made no...

Anybody know how these things work?

I was getting some "buzz" in my wetsounds. Thinking that it might be a ground loop or power issue, I re-ran the power to my head unit and eq direct to my...

I found a easy solution... put the screw in from the outside of the tower.. I never even noticed there was a hole there.

Thanks.. great info.. I didn't even look at the other side... I'll check it out and see if it is something i can replicate, or call my dealer.

The other day I noticed that the large screw that holds the back section of the tower together was loose.. the screw that you take out to lower the tower. I tightened it up and all was fine. Then...

this looks like the one i need

http://www.jamestowndistributors.com/userportal/show_product.do?pid=8925

but that is still a much bigger hole than just drilling one the size of the wire and...

tazz.. that was my initial plan, but it just seemed too cheap and easy. my second plan was to install some sort of waterproof plug in the transom, but that seemed kinda complex and expensive... I...

I'm in the process of installing some lights on my swim platform.. I need to run some power through the transom to power them. What kind of thru-hull fitting should i use? ideally, the hole will be...

I have one like this
http://www.autosoundcentral.com/Peripheral_PXA05_iPod_Aux_Audio_Adapter_p/pxa05.htm

you can plug in a ipod or just about anything else.

Razz.. if you changed to pioneer,...

never mind.. i figured it out.. you just gotta pull it hard and wiggle it.

I'm trying to replace the light bulb in the tach of my 07 LSV. I cant seem to get the old one out. Is there some sort of trick to it? All the other gauges were really easy.

I recently added a wetsounds 485 to my tower.. i love it.. crystal clear music at 80'.

you can run the wires around the bow.. that is about 12', or you can fish them down into the ski locker and back up through the kickplate.. about 6'. i thought it looked like it would be hard, but...

After a ride in some very rough water last year I started to notice some cracks extending away from the gas cap. They seems to get a little bit worse each time I take the boat out. Is this bad? ...

yeah.. it should plug into the round port on the back.. looks like this

http://i250.photobucket.com/albums/gg276/cab13367/Boat%20Pics/IMG_0767.jpg

I have a cable similar to this one.. works great. My head unit is a little different, but I think if it have a CD changer port, this should work.
...

Is there any reason why I should not remove (cut out) the entire kick pannel and put a sealed box in the same place? Would this create any structural issues? or is it only there for looks.

one wire goes all the way through, and one wire goes to the led.. in the pic, the black wire would be coming from the switch and pass through 10 of these connectors (one for each led).. the red wire...

one wire goes all the way through, and one wire goes to the led.. in the pic, the black wire would be coming from the switch and pass through 10 of these connectors (one for each led).. the red wire...