Search:

When I ordered it I was given a bag of snaps to install, which the canvas shop is using for the new cover their sewing up now. Can get them at any marina, or eBay. Still for sale, if interested pm...

If anyone is interested I have a Sunbrella Black canvas snap on bow cover for an 01-03 Outback LS. I ordered it thinking it would fit my 2000 Outback, no such luck. Purchased here;
...

Yep, I drilled and tapped my Holley wedge for a vacuum line connection, still no luck correcting the mixture issues. I believe one of the metering blocks had a blockage of some sort, or I had a leak...

Runs great with the Edelbrock, no better or worse than a properly tuned Holley I'm sure. I just had so many problems with the Holley that I wanted to try something different. And, the Edelbrock is...

Just wanted to post an FYI for future searches, if you replace the Holley with an Edelbrock 1409 you'll need an 8 degree spacer wedge, Summit sells them for about $80. Would have saved me several...

Looking nice, I did the pop-up cleats also, always a little sketchy drilling into a new boat! Holy scary trailer, no rudder protection!

14936

14937

Couple of pics from today's trip, locked up near Nashville for a 40 mile round trip. Great day!

I like it, that tower fits the moombas real well.

Nice, dig the blue

3 hour test drive in today, everything is good to go.

14841

New engine, stereo, tower, bimini, and LED's installed..she's a keeper!

$312 installed

Yeah, that Holley had a leak somewhere and I just couldn't pin it down. Then I torqued it down a little too hard and cracked the base plate, wasn't worth my time or money to replace it and continue...

I used Meguiars Ultimate Compound and then Mequiars polishing compound, knocked out all the scratches down to 1200 grit I believe. I've got a black Outback, so oxidation is a big issue, I needed...

Edelbrock 1409 ordered. Holley gets an F

Totally stumped now...Got on the power valve trip earlier, the machine shop that rebuilt my carb put a 5.5 in it, instead of the 2.5; couldn't find a replacement 2.5 PV in town, so I bought a Holley...

Just replaced my engine with a new crate motor from GM, got it on the water today and I'm having some carb issues I believe. Anyone here familiar with the Holley 4150?

I adjusted timing with...

I think I've got it figured out, looks to be a bad oil pressure switch. Anyone have a part number for the 3 wire switch?

Mike, thanks for looking out. I actually got the cables run just fine. Got her fired up for the first time tonight! Timing is set, and working on the carb adjustments.

Having a problem with...

How much for the mirror?

Thanks guys. Day of remembrance for all those who have paid the ultimate sacrifice.

U.S. Army, 1999-present

Time invested...probably 5 hours of wet sanding, and another 3 polishing. I still have another 2 hours of final polishing and waxing to go.

I wasn't afraid, the gel coat is extremely thick and wet sanding deliberately by hand doesn't remove material nearly as quickly as power sanding. I went down to 600 around the decal ghosting until...

Finished up the wiring today, think it turned out pretty clean.

14493

Those connectors look cool. Between my speaker wires and 360 wiring I've got 6 different connections, so that particular connector wouldn't fit for me. I bought some 3/8 ID black tubing from Home...