Search:

Type: Posts; User: MLA

Page 1 of 20 1 2 3 4

Search: Search took 0.06 seconds.

  1. Replies
    11
    Views
    242

    With the white grills, not very noticeable. As...

    With the white grills, not very noticeable. As long as there are 2 unused chnls on the head-unit, it would drive them just fine, just go with the 4 ohm version. The reason I like the external amp...
  2. Replies
    11
    Views
    242

    Yould be quite surprised in the case of this...

    Yould be quite surprised in the case of this speakers. I was when I first get a demo them last year.

    Brett, if you do move forward, consider the 2 ohm version and the PXA200.2
  3. Thread: Thru Hull question

    by MLA
    Replies
    4
    Views
    113

    If the sealer was still fresh and uncured, yes,...

    If the sealer was still fresh and uncured, yes, its ok for it to spin as the sealer acts like a lube when uncured. Often times, the whole assembly needs to be turned, in order to allow for the ball...
  4. Replies
    20
    Views
    642

    Looks like Toto just pulled back the curtain a...

    Looks like Toto just pulled back the curtain a little too much. If true, that could explain the tone, temper and direction of some particular threads. Seems like emotion due to a financial interest,...
  5. Replies
    18
    Views
    399

    I missed the so-called expert's post, but giving...

    I missed the so-called expert's post, but giving the benefit of the doubt to the manf. on their amp specs, 420w rms (got that from the manuals ive never read :p) is too small for my liking for what...
  6. Replies
    11
    Views
    260

    Ok, with the DXA250.4 driving the 6 in-boats: ...

    Ok, with the DXA250.4 driving the 6 in-boats:

    If the bow pair is on their chnls, they are receiving 30W rms
    If the port main cabin pair are wired in parallel on a chnl, they are also receiving...
  7. Replies
    11
    Views
    143

    sorry for the delay, i was eating lunch ...

    sorry for the delay, i was eating lunch

    http://www.exileaudio.com/store/downloads/xm-amp-manual.pdf

    http://www.exileaudio.com/store/downloads/xm30installsheet062514.pdf
    ...
  8. Replies
    11
    Views
    143

    I have seen the instructions. I wouldnt presume...

    I have seen the instructions. I wouldnt presume anything. If you look at the 2 manuals, you will see one huge glaring contradiction. If you look at the arbitrary setting for the 5 chnl amp, there is...
  9. Replies
    11
    Views
    143

    First, I would not assume that the amp is coming...

    First, I would not assume that the amp is coming out of the box with the switches in the correct position. 2nd, too many variables to use a one-size-fits-all tune. Speaker size, type, use, head-unit...
  10. Replies
    18
    Views
    399

    14ga would be fine if you ran a 2 conductor for...

    14ga would be fine if you ran a 2 conductor for each pod, but a little light if a pair of pods is parallel up in the tower. But, 4 2-conductors would be thicker than a single 12/4 that could supply...
  11. Replies
    11
    Views
    260

    i with Phil, surprised the 2 ohm bridged load has...

    i with Phil, surprised the 2 ohm bridged load has not put the 200.2 into protect mode.

    Let me crunch the numbers on the in-boat amp change.
  12. Just pull the hose from the caliper and see what...

    Just pull the hose from the caliper and see what gravity does. With the cap off the master cyl, you will likely get fluid out. If not try the mity-vac or similar. I made a pressure bleeder using a...
  13. Pull the hose/line from the caliper and see of...

    Pull the hose/line from the caliper and see of you get fluid from the line. If so, then pull the bleeder and make sure its clear. Leave it out and reconnect the hose/line and feed fluid into the...
  14. Replies
    7
    Views
    144

    What feature(s) is the current unit lacking? 7...

    What feature(s) is the current unit lacking? 7 years old may make it tough to find a model that supports your current remotes.
  15. Replies
    15
    Views
    264

    Sorry Mike, hard to comment on deleted text....

    Sorry Mike, hard to comment on deleted text. Knowing you run an ARC makes it clear that a different wiring scheme is required, as well as a different mode of use.
  16. Replies
    15
    Views
    264

    The OP is not running an ACR that he's indicated...

    The OP is not running an ACR that he's indicated in this thread. Up to now, you have not indicated the use of an ACR. This makes your comments misleading and inaccurate as it pertains to the OP's...
  17. Replies
    15
    Views
    264

    The ANL fuse holder looks like the OEM setup for...

    The ANL fuse holder looks like the OEM setup for the factor audio.

    The 50A resetable breaker likely supplies the helm BUS. Yes, terminate to the switch C post.
  18. Thread: Sony BT unit.

    by MLA
    Replies
    6
    Views
    97

    The M70BT is a great unit. According to a sony...

    The M70BT is a great unit. According to a sony source, it will only support the non-display remotes. Given how Sony wires their remotes, the X60 data is sent via a different cable that operates the...
  19. Thread: Sony BT unit.

    by MLA
    Replies
    6
    Views
    97

    I dont think Sony currently produces a BT unit...

    I dont think Sony currently produces a BT unit that will work with the LCD display remote. The DSXS310BTX will, but believe its retired.
  20. Replies
    15
    Views
    264

    This is just not the case. You still have a...

    This is just not the case. You still have a chance at running the main cranking battery down, just as theres a chance with the other configuration.

    In order for your stereo bank to receive any...
  21. Replies
    15
    Views
    264

    This is incorrect and actually describes your...

    This is incorrect and actually describes your setup to a T. Your stereo will always be drawing from one battery and you have no control over it. With the audio load wired to the common, the load will...
  22. Replies
    2
    Views
    125

    The dia of the terminal pin may be .032" but...

    The dia of the terminal pin may be .032" but factor the surface area of the entire male and female terminals when mates. Also, the gauge of the wires is determined using the entire length of the run.
  23. Replies
    9
    Views
    247

    I know lots of people that have gone from 2 pair...

    I know lots of people that have gone from 2 pair of 6.5" to one pair of 8" or 10" or from two pair of 8" to a single pair of 10". The trick is going larger.
  24. Replies
    96
    Views
    2,779

    Mark, The Kicker KM8 as a tower speaker really...

    Mark,

    The Kicker KM8 as a tower speaker really shines when driven in the 200W rms range. For a single pair, the KXM400.4 is a perfect option. For 2 pair, you can run dual 400.4 or a single 2 chnl...
  25. Replies
    96
    Views
    2,779

    Let me be clear......nothings wired wrong, just...

    Let me be clear......nothings wired wrong, just some wattage left untapped.
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4