Search:

Type: Posts; User: 996scott

Page 1 of 20 1 2 3 4

Search: Search took 0.03 seconds.

  1. LOL, I noticed that as well. I tried mine for...

    LOL, I noticed that as well. I tried mine for the first time this weekend and I thought it definitely help. I ordered another handle to make one for a friend.
  2. if it is a v-drive like my 07 LSV then you just...

    if it is a v-drive like my 07 LSV then you just need to remove the back seat and the fiberglass cover and it is on the drivers side. Really easy to see and change. Here is a thread that talks about...
  3. sulfur/rotten egg smell=bad battery... Who knew?

    Just an FYI for anyone in case it happens to them in the future. Last week was out boating and as soon as we were on the water i smelt a "sulfur" smell. It came and went most of the day and at...
  4. Thread: Moomba hat

    by 996scott
    Replies
    10
    Views
    349

    I have the exact hat and it is not too hot, like...

    I have the exact hat and it is not too hot, like mikenehrkorn said, it's mostly mesh. Just so happens I was sporting the hat as we trecked around Machu Picchu two weeks ago. Had to represent Moomba...
  5. thanks guys, i think i will go with some kind of...

    thanks guys, i think i will go with some kind of slant and see how it goes. Is 6X9 inches about what most are using as far as the size of the blade goes?
  6. so what is the overall consensus on the angle of...

    so what is the overall consensus on the angle of the blade? I know some have made it 90 degrees and others have slanted it. Is there a angle that most agree on? just got my stuff yesterday and am...
  7. Replies
    546
    Views
    62,407

    biggest question for me is WHY was the tower...

    biggest question for me is WHY was the tower removed? Damage?
  8. Thread: GatorStep!

    by 996scott
    Replies
    16
    Views
    1,113

    looks great, curious as to the cost on the on the...

    looks great, curious as to the cost on the on the swim deck and the gunnel pads? my swim deck is getting a little worn out. Would love to see the gunnel pads when you get them.
  9. Replies
    219
    Views
    14,350

    that is a beautiful picture!

    that is a beautiful picture!
  10. I just bought a package of them from Home Depot. ...

    I just bought a package of them from Home Depot. They are black and I'm pretty sure they are plastic. They were only a few bucks for a pack of 12 I think.
  11. Replies
    14
    Views
    951

    looks promising. can't wait to see the install.

    looks promising. can't wait to see the install.
  12. I have to remove my swim deck each time to fit in...

    I have to remove my swim deck each time to fit in the garage. I just cut the shims off so they just stick up an couple of inches above the swim deck. I put the swim deck on, tap the shims into...
  13. Thread: Oil Change

    by 996scott
    Replies
    11
    Views
    565

    I have used an oil extractor in the past which...

    I have used an oil extractor in the past which was fine but a little slow. This year I bought a drill pump. I got a little extra hose and a brass fitting from Home Depot to attach to the end of the...
  14. Replies
    9
    Views
    300

    I think it was around $140 for the heavy duty...

    I think it was around $140 for the heavy duty one. Depends on which motor you buy. You can buy directly from Heater Craft or there are a lot of other suppliers. Good Luck.
  15. Replies
    5
    Views
    309

    Do you have the letters for both sides of the...

    Do you have the letters for both sides of the boat? I may be interested.
  16. Thread: Parts locator

    by 996scott
    Replies
    10
    Views
    431

    oh.... the Darth Vader helmet. Now I understand...

    oh.... the Darth Vader helmet. Now I understand what your talking about:)
  17. Replies
    9
    Views
    300

    You can take it apart and make sure there are no...

    You can take it apart and make sure there are no loose wires or connections anywhere. If it's ok then like Brokeguy said, probably the motor. I just replaced my motor last year, my breaker would...
  18. Replies
    7
    Views
    144

    any kind of vinyl repair kit should work if it is...

    any kind of vinyl repair kit should work if it is a pin hole. Call wakemakers and they can tell you what is the best stuff. I'm sure others have used different stuff and will chime in.
  19. service differences between the 325 and 340hp engines

    Just want to make sure I am not missing anything. I have the 325hp engine in my 07lsv and do all the service. My buddy asked if I would help with his 08 xlv with a 340hp engine. from looking at the...
  20. Replies
    9
    Views
    348

    when you have it out of the water just make sure...

    when you have it out of the water just make sure the blades of the prop all look ok. You could run it out of the water for a minute hooked to the fake a lake and put it in gear and check for any...
  21. Replies
    15
    Views
    559

    Has it been "de-winterized"? If all the hoses...

    Has it been "de-winterized"? If all the hoses were disconnected then you need to make sure everything is hooked back up. I would start and run it with fake a lake at home first to make sure it...
  22. Replies
    4
    Views
    342

    are the sacks and pump still available?

    are the sacks and pump still available?
  23. Thread: Bimini Top

    by 996scott
    Replies
    2
    Views
    342

    I think you can add a bimini to almost anything. ...

    I think you can add a bimini to almost anything. We have a local canvas shop that does boat covers and they will custom make one to fit a tower. Call around to your local boat dealer and see who...
  24. Replies
    6
    Views
    547

    I'm interested in the box anchor if Dusty doesn't...

    I'm interested in the box anchor if Dusty doesn't want it.
  25. Replies
    2
    Views
    170

    I've been thinking of doing this as well. Which...

    I've been thinking of doing this as well. Which lights did you buy?
Results 1 to 25 of 500
Page 1 of 20 1 2 3 4