Search:

Boat has sold!

Thanks for all the comments. This boat has been amazing and I'm sad to see it go.

A few more pictures:

http://farm9.staticflickr.com/8509/8422040659_be662c1c38_c.jpg

http://farm9.staticflickr.com/8186/8423136034_07e1373c18_c.jpg
...

Just listed my 21V over at OnlyInboards (https://onlyinboards.com/Details.aspx?ID=36423). It's in amazing shape and I'm sad to see it go. Asking $39,500.

Here is the quick and dirty:

...

Just posted them up for sale on the Supra forums: http://www.supraboats.com/bbs/showthread.php?t=8887

This boat is SICK! It gets tons of complements both on and off the water. It is in great shape, and has been meticulously maintained and cared for.

* 5.8L high output PCM motor
* 560-ish hours ...

You can crank the wheel all the way to the left (?? I think it was to the left??) before getting into reverse and it will help to straighten out the path a little. It will still turn, but a lot less...

And some more.

The last picture shows the valves that control the flow of water to the front, and two rear sacs. This, along with the lower row of dual-pole switches allows for simultaneous...

A few more pictures.

For sale: 1997 Moomba Outback 20.5' Direct Drive

A classic late-nineties boat ready for a summer out on the lake. This boat gets tons of compliments both on and off the water. It has also been...

Check out this post for a few ideas: http://www.mastercraft.com/teamtalk/showthread.php?t=11525&highlight=lift+trailer+blocks&page=2

While it definitely was meant to be a ski boat, it doesn't resist throwing a pretty huge wake with some weight in it! :)

So nobody has done this? Anybody? ......

I have a 97 Outback DD, and I'd love to remove the ski pylon. I've tried loosening up the three bolts that are easily accessible via the bilge cover/engine area. But, the thing didn't even budge. ...

I have a 97 Outback, which is similar to yours, but I believe the rear seats are a bit different.

Fat sacks are the way to go. It really depends on how large you want the wake, but one in the...

You might try giving ACME a call, or Karl from boarditup.com (616-530-0442). I talked with both, and they were very helpful in getting me the right prop. In my case, it was for a heavily weighted...

One thing that makes a huge difference is how you edge into and through the wake. Standing tall as you come up and off the wake is key. Think about trying to break your board over the top of the...

bobwells: Is it ok to spin the prop out of water? Wont the shaft begin to overheat/cause damage as it spins without some sort of lubrication?

Reason I ask is that I wanted to do this one time...

I'm finally joining the Perfect Pass club with my 97 outback - just ordered the new GPS Stargazer PP wake edition. Can't wait to get it in.

Anybody else running the stargazer? How do you like...

byronkoz is right, 6x9 are louder than 6.5. From what I've seen, then also typically handle more power. But it's a compromise, as the sound quality from a 6.5 is much better.

I'm with tlatoani...

I've also heard good things about buying through OnlyInboards (http://www.onlyinboards.com/perfect-pass.html). I just got a quote from them that seemed very competitive.

Sweet boat - if I was closer I'd look into it!

I'll jump in on this hijack!
Check out this link for details on my amp racks - very similar to what he has done. I epoxied blocks to the hull. At...

Here are some thoughts and insight after reworking my system a couple times last summer:

* The Polk speakers are great for the price. I run 6 or the Polk MMC650's.
* When looking at amp's, make...

I had a Yellow top Optima go bad in just under a month last year. Even after charging it, it wouldn't hold the proper voltage. Took it back and they swapped it out - no questions asked. No...

Hyperlite 3DS boots with a 143" 3DS board.

Congrats on the new boat. I also have a '97 Outback, and I have the Moomba manual and the PCM manual. They are kind of long, but I'll see about starting to scan them in.

In the mean time, if...